Home Network Community > DSL Modem&Routers > firewall on WD8968 v4
< DSL Modem&Routers

firewall on WD8968 v4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

firewall on WD8968 v4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
firewall on WD8968 v4
firewall on WD8968 v4
2017-02-10 19:35:54
Model :

Hardware Version :

Firmware Version :

ISP :

Hi
I have the latest firmware now[CODE]









Firmware Version: 1.1.1 Build 151229 Rel.30697
Hardware Version: TD-W8968 V4 0x00000001


[/CODE]
It says on the release notes firewall added, but I can't find it on the menus

I need to set up port forwarding, but not easy without firewall settings, and port 7777 is closed, which is what I would like.

However, if I cant use that port, is there a list of open by default ports WAN to LAN, so I could port forward from one of those.

many thanks
Richard
  0      
 
  0      
 
#1
Options
6 Reply
Re:firewall on WD8968 v4
2017-02-11 20:30:16
Do you have public IP address on WAN port?
  0  
  0  
#2
Options
Re:firewall on WD8968 v4
2017-02-11 22:00:23
yes a fixed IP address in the range 80.x.x.x.
  0  
  0  
#3
Options
Re:firewall on WD8968 v4
2017-02-12 15:08:30
Can you see NAT - Virtual Server


  0  
  0  
#4
Options
Re:firewall on WD8968 v4
2017-02-12 19:04:49
Hi
Yes I can see that , and enter input port and redirected port
But
when trying it I get a refused message.
BTW trying access with a mobile phone which IS on a different IP net so any incoming from that will be on the WAN.

Hence I need the firewall access to open the required port
Tnx
  0  
  0  
#5
Options
Re:firewall on WD8968 v4
2017-02-13 01:08:22
What service/server do you have on this port 7777? In local network everything is OK? Can you show me screenshot from Virtual Server and your settings?
  0  
  0  
#6
Options
Re:firewall on WD8968 v4
2017-02-13 02:11:50
Hi
[CODE]




























Server Name External Port Start External Port End Protocol Internal Port Start Internal Port End Server IP Address WAN Interface Status Enable/Disable Edit Remove
cam 7777 7777 TCP 7777 7777 192.168.51.139 pppoa0 Enabled [/TD]
[TD="bgcolor: #FAFAFA, align: center"]

[/CODE]


And what wasn't working now is.

TOTALLY CONFUSED NOW, its been rebooted several times, and failed to work after each reboot, ask a question on the forum and its working,
Who waved the magic wand ????:)
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 776

Replies: 6

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.