Home Network Community > DSL Modem Routers > TP-LINK 840 DNS Server not respond
< DSL Modem Routers

TP-LINK 840 DNS Server not respond

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-LINK 840 DNS Server not respond

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK 840 DNS Server not respond
TP-LINK 840 DNS Server not respond
2017-07-02 20:53:21
Model :

Hardware Version :

Firmware Version :

ISP :

Hello everyone!
i used 2 tp link router, one for wireless accesspoint for this purpose i used TL-WR841HP, and from one lan port i used for next wireless internet and for this purpose i used TL-WR840N , when i restart the device 840, then internet not working and show DNS Server not responding, then i go to setting and release the WAN ip, and click on renew after that internet is going to work start, i want to know in which device problem in 841, or in 840.
  0      
 
  0      
 
#1
Options
7 Reply
Re:TP-LINK 840 DNS Server not respond
2017-07-19 17:16:49
how do you connect them? A topology may help us to understand the issue here.
  0  
  0  
#2
Options
Re:TP-LINK 840 DNS Server not respond
2017-07-20 18:35:12


flying snow wrote

how do you connect them? A topology may help us to understand the issue here.
  0  
  0  
#3
Options
Re:TP-LINK 840 DNS Server not respond
2017-07-20 18:52:19




here all the detail, of mine network, i am weak in English, that's why i think i explain well with the help of picture
File:
internt pro.pngDownload
  0  
  0  
#4
Options
Re:TP-LINK 840 DNS Server not respond
2017-07-21 14:15:57
do you want to separate users?
if no, you can try this, setup tl-wr840n in access point. after the configuration, connect that cable from 841Hp to the lan port of TL-WR840N.
you just need to reconfigure the 840n: disconnect cable from 841hp first, then change the lan ip address of 840n to 192.168.1.16-hit save. go to dhcp settings to disable dhcp server--save--reboot --connect cable from 841hp to the lan port of 840n.(lan to lan).
  0  
  0  
#5
Options
Re:TP-LINK 840 DNS Server not respond
2017-07-22 15:14:59
i need to separate the users, because there two office, in one office use 192.168.1.1-254 and in second office use 192.168.0.1-254,
  0  
  0  
#6
Options
Re:TP-LINK 840 DNS Server not respond
2017-07-24 06:17:57
You have two LANs where 41HP works as ISP for 840N. The connection type for 840N should be static IP and it should be set to fixed IP of the 41HP LAN let we say 192.168.1.2 and in that Network 41HP the DHCP server should has a pool outside that IP.

Another thing for 41HP network connection, set the DNS for it.

I have similar situiation like yours where I have TD-8810 as an ADSL routers/modem for my ISP and the WiFi is addressed by LinkSys 54g
  0  
  0  
#7
Options
Re:TP-LINK 840 DNS Server not respond
2020-06-16 22:10:48

@Anton L.Z. 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1595

Replies: 7

Related Articles
Why does my TP-Link Archer A5 query to DNS root server?
2965 0
 Can't use any DNS server on my TP-Link router
674 0
TP-Link Dynamic DNS not working
1003 0
Changing DNS server
1417 0
TP-Link Cloud Dynamic DNS Problem
578 0
Service Provider by TP-Link Dynamic DNS Down again!
1332 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.