TL-WPA7510 LAN passthrough configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA7510 LAN passthrough configuration
Model :
Hardware Version :
Firmware Version :
ISP :
Product: TL-WPA7510 KIT V1
Original firmware only available.
I purchased a TL-WPA7510 kit yesterday and have been having trouble configuring it. The WiFi side of the configuration is well covered in the manual and videos, however the LAN passthrough is not. I have configured the main device to accept an address via DHCP, which it has done, though I am not able to connect to the network on the machine connected to the Ethernet port on the remote unit. I'm getting the APIPA address (169.254.x.x; 255.255.0.0) on the remote connected machine. When I set the address manually I'm not able to connect to the rest of the network. Can anyone help me out with what I'm missing in the configuration here.
Thanks
Hardware Version :
Firmware Version :
ISP :
Product: TL-WPA7510 KIT V1
Original firmware only available.
I purchased a TL-WPA7510 kit yesterday and have been having trouble configuring it. The WiFi side of the configuration is well covered in the manual and videos, however the LAN passthrough is not. I have configured the main device to accept an address via DHCP, which it has done, though I am not able to connect to the network on the machine connected to the Ethernet port on the remote unit. I'm getting the APIPA address (169.254.x.x; 255.255.0.0) on the remote connected machine. When I set the address manually I'm not able to connect to the rest of the network. Can anyone help me out with what I'm missing in the configuration here.
Thanks
