Home Network Community > All Threads > How to download the ISP file from TP-LINK?
< All Threads

How to download the ISP file from TP-LINK?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

How to download the ISP file from TP-LINK?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to download the ISP file from TP-LINK?
How to download the ISP file from TP-LINK?
2017-11-24 03:43:06 - last edited 2020-12-04 06:26:10
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

I'm looking how to download the ISP FILE from TP-LINK. In the help it says the following:

ISP Update Help

You can update the ISP information on this page.

Note: It is important to keep the device powered on during the entire update process, as any loss of power may damage your device.

To update the device:
1. Download the latest ISP update file from the Support page at www.tp-link.com to your computer.
2. Click Browse to locate and select the latest file
3. Click Update

But if you look at the website you can't find that flle. Any help on this?
  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:How to download the ISP file from TP-LINK?-Solution
2020-12-04 06:26:03 - last edited 2020-12-04 06:26:10

@Haxes 

 

Hello, thanks for asking.

 

What is the current ISP file version on the MR600 now? You may check if it is newer or already the same version as the one you downloaded from the official website. If the Current ISP Version is already the latest or newer, there is no need to upgrade it:

 

However, if it is an older version, you may need to choose the below zip file directly but not the attachment or the netispinfo one:

 

I hope this works, good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  8  
  8  
#8
Options
12 Reply
Re:How to download the ISP file from TP-LINK?
2017-11-24 16:48:31
What's the model number? What's ISP update file? You mean the firmware for the product?
  0  
  0  
#2
Options
Re:How to download the ISP file from TP-LINK?
2017-11-26 12:53:00
The model is the M7350.If you go to the Administration Page —> Advanced —> Dial-up , inside there you will find a section called ISP update. There it says you can download the ISP file in the Tp-Link support page, but I can’t find it.
  0  
  0  
#3
Options
Re:How to download the ISP file from TP-LINK?
2018-07-24 01:37:24
Same question
  0  
  0  
#4
Options
Re:How to download the ISP file from TP-LINK?
2020-06-26 19:10:24

@jawks79 

 

an old thread i know but i was searching for the same thing.

 

i found the file in the downloads section of my mr600 router on the same link as you mention.

 

updated it and it seems to have sorted my speed issue out.

  0  
  0  
#5
Options
Re:How to download the ISP file from TP-LINK?
2020-06-26 19:13:03

@jawks79 

 

for the mr600 it was here.

 

isp link

  0  
  0  
#6
Options
Re:How to download the ISP file from TP-LINK?
2020-12-03 11:04:12

@jawks79 

 

I'm trying to update the ISP for the M600 V1.Firmware 1.2.0.0.9.1   I found the correct page, downloaded and have the uncompressed the file. There are only two files located within the folder plus a "how to" pdf. neither file is recognized by the router, one is called attachment and the other netispinfo. Is the file missing?

  2  
  2  
#7
Options
Re:How to download the ISP file from TP-LINK?-Solution
2020-12-04 06:26:03 - last edited 2020-12-04 06:26:10

@Haxes 

 

Hello, thanks for asking.

 

What is the current ISP file version on the MR600 now? You may check if it is newer or already the same version as the one you downloaded from the official website. If the Current ISP Version is already the latest or newer, there is no need to upgrade it:

 

However, if it is an older version, you may need to choose the below zip file directly but not the attachment or the netispinfo one:

 

I hope this works, good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  8  
  8  
#8
Options
Re:How to download the ISP file from TP-LINK?
2020-12-04 16:48:38

@Kevin_Z  my current version is 18101801

  0  
  0  
#9
Options
Re:How to download the ISP file from TP-LINK?
2020-12-04 16:55:02
Thank you, you where correct I needed to upload the zip file directly instead of uncompressing the file.
  3  
  3  
#10
Options
Re:How to download the ISP file from TP-LINK?
2020-12-07 01:13:00

@Haxes 

 

Yes, so the issue is resolved now? Glad to know that helps, good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#11
Options
12

Information

Helpful: 1

Views: 27395

Replies: 12

Related Articles
M7450: Can't upgrade ISP file
2557 0
TP Link Archer C50 used as access point slow download (ISP) speed
1443 0
M7350 ISP file
2837 0
ISP Upgrade file
1296 1
Where Can You Download The TP-Link Certificate For Browser?
672 0
TP-Link Archer BE9300 for Sky ISP
303 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.