9020P Kit Different versions
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
9020P Kit Different versions
Model :
Hardware Version :
Firmware Version :
ISP :
I had four 9020p V2 power line adapters installed and performing fine. They were (US) V2. I bought another pair from Amazon that was (US) V3. After plugging in the V3 device, the TpPLC app shows a 11 mbps speed on all devices. With refreshing numerous times, I might get a truer speed indicator in the 200mbps range. I also have one device V2 that would freeze and slowdown in video streaming on my local network that was previously resolved by upgrading the firmware. Now that problem is back with the installation of the V3 device. Once I unplugged the V3 device everything returned to normal. The security cam quit freezing, the TpPLC app showed correct link speeds. Any similar problems out there and any fixes you can share?
Hardware Version :
Firmware Version :
ISP :
I had four 9020p V2 power line adapters installed and performing fine. They were (US) V2. I bought another pair from Amazon that was (US) V3. After plugging in the V3 device, the TpPLC app shows a 11 mbps speed on all devices. With refreshing numerous times, I might get a truer speed indicator in the 200mbps range. I also have one device V2 that would freeze and slowdown in video streaming on my local network that was previously resolved by upgrading the firmware. Now that problem is back with the installation of the V3 device. Once I unplugged the V3 device everything returned to normal. The security cam quit freezing, the TpPLC app showed correct link speeds. Any similar problems out there and any fixes you can share?