Archer C8 v1 compatibility with Intel 9260 client
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C8 v1 compatibility with Intel 9260 client
Model :
Hardware Version :
Firmware Version :
ISP :
I recently installed a new Intel Wireless-AC 9260 card in my Dell XPS 9570 laptop (Windows 10 April 2018 Update), installed the latest Intel drivers and then connected to the Archer C8 on the 5 GHz SSID which is set to 802.11 a/n/ac/mixed. Unfortunately the link speed as shown in the Network and Sharing Center was only 54 Mbps. My previous client card - Killer 1535 - shows link speed of 866 Mbps. I tried a number of different configuration changes to the Archer C8 wireless settings but could not increase the link speed. I have since reverted to the Killer card to avoid slow network speeds but was wondering whether there is a specific configuration setting that needs to be changed to make the Intel card work properly with the Archer C8. Thanks.
Hardware Version :
Firmware Version :
ISP :
I recently installed a new Intel Wireless-AC 9260 card in my Dell XPS 9570 laptop (Windows 10 April 2018 Update), installed the latest Intel drivers and then connected to the Archer C8 on the 5 GHz SSID which is set to 802.11 a/n/ac/mixed. Unfortunately the link speed as shown in the Network and Sharing Center was only 54 Mbps. My previous client card - Killer 1535 - shows link speed of 866 Mbps. I tried a number of different configuration changes to the Archer C8 wireless settings but could not increase the link speed. I have since reverted to the Killer card to avoid slow network speeds but was wondering whether there is a specific configuration setting that needs to be changed to make the Intel card work properly with the Archer C8. Thanks.
