ZTE mf195 and MR3420
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ZTE mf195 and MR3420
Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206
ISP :
Hello!
Firmware Version:
3.13.27 Build 121206 Rel.60215n
Hardware Version:
MR3420 v2 00000000
I have a problem with a ZTE mf195. I doesn't work :( I used the mf190 bin from the tp-link offical site ( because i have read that that will work) - but not for me :( Then I started the USB Sniffer tool and did the stepbystep method from the guide. (3times) But the bins also don't work... Everytime it says "Identify successfully" but some seconds later it is disconnected. So I looked into the log and found the following things:
http://www.imagebanana.com/view/989vuj5e/Bildschirmfoto20130608um18.27.22.png
http://www.imagebanana.com/view/lqms4z5w/Bildschirmfoto20130608um18.26.58.png
http://www.imagebanana.com/view/yuns6b3a/Bildschirmfoto20130608um18.29.47.png
How can i fix my problem?
Franz
PS: Sorry for my english, but i'm from Austria ;)
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206
ISP :
Hello!
Firmware Version:
3.13.27 Build 121206 Rel.60215n
Hardware Version:
MR3420 v2 00000000
I have a problem with a ZTE mf195. I doesn't work :( I used the mf190 bin from the tp-link offical site ( because i have read that that will work) - but not for me :( Then I started the USB Sniffer tool and did the stepbystep method from the guide. (3times) But the bins also don't work... Everytime it says "Identify successfully" but some seconds later it is disconnected. So I looked into the log and found the following things:
http://www.imagebanana.com/view/989vuj5e/Bildschirmfoto20130608um18.27.22.png
http://www.imagebanana.com/view/lqms4z5w/Bildschirmfoto20130608um18.26.58.png
http://www.imagebanana.com/view/yuns6b3a/Bildschirmfoto20130608um18.29.47.png
How can i fix my problem?
Franz
PS: Sorry for my english, but i'm from Austria ;)
