Xarsage1 wrote

Hello, just got AC5400 not AC5400X

 

I noticed on the status on wired or wireless gimp freejobalert notepad++ showing zero but under DHCP clients list are listed.

Please help how to fix this?

 

And I emailed the TP-Link support can't go though, it said "Send Failed"

Facing the same issue here too. In need of help.

Thanks in advance,
Regards,

Brian

Waited 5min, refreshed but still no luck

Archer 5400x

Ver 1

Firmware updated

When I use tether app, clients are not shown, though I know they are connected.

@Kevin_Z For what it's worth, I have an Archer A6 v2.1 running 1.1.4 Build 20190923 rel.63745(5553).  It's in AP mode but it also doesn't show any clients.  Older firmware versions did.

I also have an Archer C50 v4 running firmware 0.9.1 0.2 v0093.0 Build 190125 Rel.6383n(4341).  It's also in AP mode and it does show the clients.

I feel like a recent firmware update broke the client list function...

I just got a TP-Link Archer A10, updated the firmware to latest (1.0.2 0.9.1 v1000.0 Build 190305 Rel.62969n(5553)).  I have the device configured in AP mode, DHCP disabled, advertising the same SSID and passwd for 2.4GHz/5GHz bands as the router (Netgear R7000) it's plugged into.  (My house is wired; I wanted better WiFi downstairs.)

Under "wired clients", I see the router and the PC I'm using to connect to the web interface.  Under "wireless clients" it sometimes shows one device but often shows zero.

If I disable the WiFi radios on the R7000 I can see the devices move to the AP -- they appear as wired devices in the connection list on the R7000.  All the devices connected to the A10 (mobile devices, Ring doorbell, Hunter irrigation controller) are working fine; they just don't appear in the connected device list.  The only time I've seen anything appear there is when I was using a MacBook Pro to configure the A10 over WiFi.

I had a TiVo box plugged into the A10, but that didn't show up in the Wired Clients list.  The PC I'm using to interact with the A10's web interface isn't plugged into it -- it's connected to the R7000 -- so it probably shouldn't even be in that list.

Seems like the feature is fully broken, at least in AP mode.  I don't recall it working any better with the initial firmware.

In a related story, the firmware auto-update doesn't work with the A10 in AP mode ("no internet").  I had to download it manually from the site.

@fadden I'm having this same issue and it's really frustrating.

I clearly have tons of clients connected. (30+)

In the tether app I don't see any clients and when logged into the router locally the Device List in Advanced... QOS is empty.

And even though I can access the internet on ALL connected clients, my router claims that it cannot access the internet.

This used to work as of 3 months ago or so. Not sure what would have happened.

@jerm 

Exactly the same here. Archer C6 v2, firmware just updated to 1.3.0. AP mode, static IP.

Everything is going fine.. but no clients shown (wired/wireless) and the internet light is off.