How do I fix my TP-Link router as it disconnected several times?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi everyone, it's over 3-4 months am using the TP-link AP300 router and was working fine. But from past week it is losing connection at an interval of say 10-12minutes approx. Any way out to fix this?
Regards,
SixTad
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
What is the Wi-Fi LED of the Archer AX6000 when the Wi-Fi got disconnected? Can the devices still detect the Wi-Fi network then? Please try to customize the wireless settings, like wireless channel and channel width. For 2.4GHz, use channel 1, 6 or 11, channel width to 20MHz; for 5GHz, use channel 36, 40 or 44, channel width as 40MHz.
Please also refer to the below troubleshooting to narrow down the disconnect issue:
What should I do if internet connection is not stable when the device is connected to TP-Link router?
What is the current firmware of your AX6000? Here is a beta firmware you may have a try:
https://static.tp-link.com/2020/202007/20200713/ax6000v1_us-up-ver1-1-2-P3[20200709-rel81803]_sign_2020-07-10_10.57.45.zip
May this helps.
- Copy Link
- Report Inappropriate Content
To locate the issue, please tell more details about it:
1. How many devices are connecting to the access point? How many are on 2.4Ghz network? How about 5GHz?
2. What are the devices you are using? Does the issue happen on all of them or some of them?
3. When the issue happens, are you still able to see the Wi-Fi signal? Can you still connect to it? If so, please help to check the IP address for Wi-Fi connection then.
For comparison, please check the IP address when the Wi-Fi is working. Please provide screen shots for the IP addresses for further analysis.
4. Do you have the same issue on both 24GHz and 5GHz network? Or it happens only on one band?
Sorry to be all questions, but without knowing what’s going on it’s hard to propose a fix...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I am using AX6000 since last couple of months.
I too face the same issue of internet disconnection. The task bar still shows wifi icon but no internet connection. This happens mostly around 2:30 in the afternoon. Usually there are 5 devices connected on each 2.4G & 5G. The connection is unavailable on all devices. I tried rebooting the router every morning but no success.
Strangly the internet connection is back without doing anything within 5 mins.
Yesterday same issue happened when I was working on PC. Then I checked internet connection on my iPhone. Initially it showed wifi icon, so .. when tried opening google.com, the phone switched to 4G mobile network.
The devices usually connected are:
iPhones x 2
Android phones x 3
iPad x 1
kindle x 1
printer x 1
Smart TV
Apple TV
Laptop x 1
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello,
What is the Wi-Fi LED of the Archer AX6000 when the Wi-Fi got disconnected? Can the devices still detect the Wi-Fi network then? Please try to customize the wireless settings, like wireless channel and channel width. For 2.4GHz, use channel 1, 6 or 11, channel width to 20MHz; for 5GHz, use channel 36, 40 or 44, channel width as 40MHz.
Please also refer to the below troubleshooting to narrow down the disconnect issue:
What should I do if internet connection is not stable when the device is connected to TP-Link router?
What is the current firmware of your AX6000? Here is a beta firmware you may have a try:
https://static.tp-link.com/2020/202007/20200713/ax6000v1_us-up-ver1-1-2-P3[20200709-rel81803]_sign_2020-07-10_10.57.45.zip
May this helps.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 27059
Replies: 5
Voters 0
No one has voted for it yet.