My Current home wifi is setup with 'quick setup' option with 'Dynamic Ip'. 

I have two work offices. One is client office and other is my employer office. 

I am trying to connect my laptop to client office vpn from my personal home wifi and employer wifi. 

I can connect my laptop to client office vpn from employer wifi without any problem and vpn is stable. 

But same laptop from my home wifi to client office vpn is not stable and disconnects frequently. My home office wifi is setup using tplink archer c60. 

What setting should I do on the router in order to have stable vpn at home wifi network

? 

I did not setup Client office VPN, as its different corporation for which i provide service to and the VPN is already setup for consultants like me.

The same Client office VPN works fine when i connect my laptop with:

   1) My employer corporate wifi.

   2) My personal mobile data wifi hotspot.

VPN is not stable (automatically disconnects) only when i connect to my home personal wifi that is setup using Archer C60.

Thats the reason i am seeking help from tp-link community if there is any setting not fine with Archer C60 router.

i tried to google about this behavior, there are lot of people talking about this particular issue of that their corporate VPN is not stable while connecting to home wifi. But Nowhere i could find a solution for this issue.

Thanks 

@Alagesan 

Hello, got the same problem with the Archer A10 AC2600. I've done all what you recommend and doesn't work. My VPN client for office is Sonicwall.

@ML3 I found out that nearby interferences from other neighbours networks could create issues. If I'm working from my basement, my connection with Sonicwall VPN client works just find through my laptop WLAN card and the Archer_A10, on the 5_GHz network. I don't detect neighbours networks there, and less chance either to interfere with other 2.4GHz networks. And my router is at the 1st floor.

If ever I've to work from the 1st floor, I'm needed to use an Ethernet cable, even if i'm closer to the router, and no issue there. I don't think it's an issue related to the router in my case after investigation, but more with Sonicwall VPN client, and suceptible to interference while use with WLAN. All other stuff (movie streaming on Ipad, apple TV, Phone, conference call, etc..) are just working fine, and connection is really stable with the Archer_A10_AC2600, with active Mu-Mimo setting on the 5_GHz network. Hope it help!

I bought a new Archer C60 V3 router & I'm facing the same issue. Whenever I connect to my office network using open vpn my laptop's internet not working properly. But if I switch to my old (D-Link) router it's working fine.

Hi,

Even I'm facing same issue when connecting to office VPN.

Router: Archer c6 v2.0

Firmware Version: 1.1.5 Build 20191112 rel.36515(5553)

VPN : froticlient

May I know the topology of your network? 

Not sure.

Who is your internet service provider?

Railwire (INDIA)

Do you get internet from a modem or from a port on the wall?

From modem

If you connect your modem or th port on the wall to your computer directly ,can you visit your office VPN？

Yes, 

I've extend the WIFI range using other router (https://www.mercusys.co.in/product/details/mw305r) (192.168.1.1). If I connect my mac in mercusys wifi, VPN works perfectly fine. But If I connect in TPlink it starts disconnecting.

Expecting a solution soon.

Prabu.