Question about LAN ports speed.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello there.
I've got this kinda older version of WR1043N (I assume first one) which suposed to be able to get LAN speed: 10/100/1000, but when I connect my PC via Cable (cat5e) any test via LAN shows my max internet speed connection around 120. (Laptop got 1000 lan card, when I connect directly to modem speed goes to my max. around 260). Is there any way to get full speed via router LAN ports? I've searched anything in options but couldn't found nothing.
Hi again :)
Here's firmware and Hardware data You asked:
| Firmware Version: | 3.13.15 Build 140319 Rel.41339n |
| Hardware Version: | WR1043ND v1 00000000 |
So my PC connected via cable to router shows this:
As You can see it shows 1Gb/s while connected via cable, but when I run some speed test it gets only as this:
Tried connecting directly to modem and after that speed test shows how it should be:
Was confused cause router if I recall good should have all lan ports 1Gb/s. I've assumed that if I connect modem to router via cabel, and then cabel from router to PC it should get max speed like it does when I connect directly to modem.
If this does matters too but here's speed while connected to WiFi:
Hi,
Yes I've tried to rest (first thing I had done while those connection issues), it didn't help at all.
If i recall good I've bought it few years ago, some time after it was released.
After updating LAN card drivers and setting speed duplex to full 1Gbps didn't do nothing.
Perhaps there's option on router to change Speed&Duplex of LAN ports? I've search for it but can't find anything.
Maybe it's time to get some new one, but on the other hand this one let's say works almost perfectly.