Deco M9 Plus parental controls; how to white-list a URL

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M9 Plus parental controls; how to white-list a URL

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M9 Plus parental controls; how to white-list a URL
Deco M9 Plus parental controls; how to white-list a URL
2019-07-05 09:48:23 - last edited 2020-10-28 10:37:51
Model: Deco M9 Plus  
Hardware Version:
Firmware Version:

I see no way in the parental controls to whitelist sites (only blacklist) per user. I have one teenager trying to access sites that should not be blocked (in my opinion) - for example www.speedo.com (a web site for swimming accessories and clothing), and www.vintageandvinyl.co.uk (a record store)...

 

I understand TP-Link curates sites for their hard coded whitelist, so how does one submit valid sites for inclusion (if it is not possible to whitelist them in the app)?

 

 

  13      
  13      
#1
Options
2 Accepted Solutions
Re:Deco M9 Plus parental controls; how to white-list a URL-Solution
2019-07-05 11:36:40 - last edited 2020-10-28 10:37:51

Hi, 

 

Below is the instruction to setup parental control via Deco app.

https://www.tp-link.com/support/faq/1598/

 

As you know, there is no whitelist available now, only blacklist. While this feature has been forwarded to our R&D team, and they are working on it.

 

You can keep an eye on official website for it updates. 

 

Thanks for your cooperation and support in advance, and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Deco M9 Plus parental controls; how to white-list a URL-Solution
2020-10-28 10:52:23 - last edited 2020-10-28 10:52:57

Hi @ToddH and all, thanks you all again for your valued suggestions.

 

As we respond earlier this feature request has been forwarded to our R&D team, and they are evaluating how to improve or add this functionality. While there is currently no exact date or time expectation for the new firmware supporting it.


It is suggested to keep an eye on the Deco app or the official website for any updates in the future.

 

We hope you could understand and wait, thanks.

Recommended Solution
  0  
  0  
#11
Options
31 Reply
Re:Deco M9 Plus parental controls; how to white-list a URL-Solution
2019-07-05 11:36:40 - last edited 2020-10-28 10:37:51

Hi, 

 

Below is the instruction to setup parental control via Deco app.

https://www.tp-link.com/support/faq/1598/

 

As you know, there is no whitelist available now, only blacklist. While this feature has been forwarded to our R&D team, and they are working on it.

 

You can keep an eye on official website for it updates. 

 

Thanks for your cooperation and support in advance, and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-03-13 22:09:12

@Kevin_Z no update on this?  Seems like such an obvious feature.

  13  
  13  
#3
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-03-17 19:12:52

Yes please add this!

 

for example, if I want to give a kids device access to an email account but not all of the sites available for online communication. I would want to filter online communication, but whitelist one site for email.

  12  
  12  
#4
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-03-18 02:36:57

@JrobertP @mehrvarz 

 

Not yet; there do have a firmware that will be released for Deco M9 plus v2 in the near future, but I'm afraid that the white-list rule for parental control has not included. 

 

We will summarize the feedback we received and reach out to our Product department. Any updates, we will let you know. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-04-04 15:48:19

@Kevin_Z 

 

This is extremely limiting to using categories for content filtering. This is an essential feature for any system that uses categories for content control. Get it done or many like me will move onto a system that works for our real world needs.

 

this is a significant limitation for me especially with kids at home doing online school.

 

Kevin_Z wrote

@JrobertP @mehrvarz 

 

Not yet; there do have a firmware that will be released for Deco M9 plus v2 in the near future, but I'm afraid that the white-list rule for parental control has not included. 

 

We will summarize the feedback we received and reach out to our Product department. Any updates, we will let you know. 

 

 

  5  
  5  
#6
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-04-22 13:07:29

@Kevin_Z please add this feature!

  5  
  5  
#7
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-04-23 08:59:18

Yesterday I tried to block individual sites on the app having drilled down on a users parental controls profile. When clicking on 'Netflix' for example it gives the option to 'block this site'. Great I thought, can stop the kids watching tv during the day (when they should be doing schoolwork), which it did... However, there is no way to then reactivate that site! Had to completely delete that profile and start again....  grrrrr!!!!

  1  
  1  
#8
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-06-20 08:55:57

@Kevin_Z 

So this is not going to be implemented in a near (or distant) future?

Is it really that hard to put all new devices in a Default group that you can use parental control on?

 

For me it feels like a basic feature, since it's so easy to "hack" the parental control by changing the mac-address.

 

If this is implemented it would so great.


Best regards,

Johan Samuelsson 

  0  
  0  
#9
Options
Re:Deco M9 Plus parental controls; how to white-list a URL
2020-10-28 00:38:54

@MarkPayne I wanted to echo the above statements. I have an M5 system and just discovered that I'm not able to whitelist individual websites. This is a major problem for any serious content filter. Specifically because the 'adult content' filter is ridiculously broad. It lumps pornography into the same category as alcohol or hunting related websites. This single category needs to be broken into multiple categories and a whitelist option added for individual website. 

 

Are these features in development, and if so when can I expect them to be released?

 

  2  
  2  
#10
Options
Re:Deco M9 Plus parental controls; how to white-list a URL-Solution
2020-10-28 10:52:23 - last edited 2020-10-28 10:52:57

Hi @ToddH and all, thanks you all again for your valued suggestions.

 

As we respond earlier this feature request has been forwarded to our R&D team, and they are evaluating how to improve or add this functionality. While there is currently no exact date or time expectation for the new firmware supporting it.


It is suggested to keep an eye on the Deco app or the official website for any updates in the future.

 

We hope you could understand and wait, thanks.

Recommended Solution
  0  
  0  
#11
Options

Information

Helpful: 13

Views: 10915

Replies: 31

Related Articles