Home Network Community > All Threads > Wifi Deco M4 only 300Mbps
< All Threads

Wifi Deco M4 only 300Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wifi Deco M4 only 300Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi Deco M4 only 300Mbps
Wifi Deco M4 only 300Mbps
2019-07-23 17:29:13 - last edited 2019-07-23 17:35:50
Model: Deco M4  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20190620 Rel. 45372

Hi,

i have two deco ,linked in wifi, and my wifi speed max out only the 2.4 GHz. When i connect the laptop directly to the main deco with cable the speed is around 800 Mbps but in wifi only 300Mbps, even i disconnect the second Deco the speed don't change. Today i installed the new firmware but when i turn off the 2.4Ghz band the speed is the same and i watch with the android app Wifi Analyzer that the 2.4 network is still there with no SSID. I tried with a few phone (the negotiation speed say varied from 390 to 768 Mbps) and laptop and even two new Deco M4 and same result.

The M4 max speed is 300 so?

 

Kind regards

  0      
 
  0      
 
#1
Options
1 Reply
Re:Wifi Deco M4 only 300Mbps
2019-07-24 01:59:08

@Antonio89 

 

For the speed issue, with main Deco connected to the modem only, you can connect your smart phone or computer to the Deco wifi network and run the speed test for 3 times.

 

Meanwhile, please click here to check the wireless negotiation speed on your device. Please notice that the actual speed equals 60% of the wireless negotiation speed, and considering the interference/obstacles, the actual speed will be lower. So compared to the varied wireless negotiation speed, the current wifi speed seems normal. 

 

For the 2.4GHz detected by the wifi analyzer with 2.4GHz host network disabled, it is used for the wireless backhaul among the Deco units. It won't be detected by the regular wireless devices. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 2004

Replies: 1

Related Articles
Deco M4 setup with Maxis Fibre 300mbps
4443 0
WIFI ON DECO M4
1154 1
My Deco M4 capped at 100MBPS only
188 0
Deco M4 - speed capped at 100Mbps
54523 0
Deco M4 wifi clients with wifi connected and "no internet"
38488 2
Deco M4 Wifi Stutters But Speed is Fast
1089 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.