How configure C2300 for Internet over VLAN and IPTV over bridge?
How configure C2300 for Internet over VLAN and IPTV over bridge?
Bridge is not active in menu for LAN4.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, below is the instruction to setup IPTV function on the Archer C2300.
https://www.tp-link.com/support/faq/1538/
You can give it a go with the information given by ISP.
May it work and have a nice day.
- Copy Link
- Report Inappropriate Content
I can not choose "Bridge" in list for IPTV if Internet over VLAN.
- Copy Link
- Report Inappropriate Content
Hello, thanks for your reply.
From your picture, the IPTV uses VLAN like internet. Theoretically the router can satisfy your needs.
The IPTV/VOIP can be regarded as bridge, for example, to use IPTV over bridge, you can enter the specific VLAN ID, and select IPTV for LAN 4 port.
Then please connect the IPTV to LAN 4 port and verify whether it works well.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
I already tried, this does not work, because the ISP switch does not pass packets through itself with the wrong VLAN.
- Copy Link
- Report Inappropriate Content
From the picture attached, you have fulfilled the VLAN ID for IPTV and VOIP, are they provided by IPTV provider?
Meanwhile, if you need enable VLAN and enter the specific ID to make the router access internet, but no VLAN needed for the IPTV feature, I'm afraid that it does not work.
Cause we need choose custom to enter the internet VLAN ID, and with that, the IPTV/VOIP VLAN ID need be fulfilled as well, but the truth is that they do not need VLAN, which make IPTV does not work, the data packets with VLAN won't be accepted by the IPTV provider.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
From the picture attached, you have fulfilled the VLAN ID for IPTV and VOIP, are they provided by IPTV provider?
No, IPTV provider requires bridge IPTV mode without VLAN ID.
I need like this picture, but with other Internet VLAN ID = 2506.
I can compile from GPL with correct VLAN ID for me, if you give full instruction how it compile.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3245
Replies: 6
Voters 0
No one has voted for it yet.