Home Network Community > All Threads > Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature
< All Threads

Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature
Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature
2019-09-07 11:09:52
Model: Deco M4  
Hardware Version: V1
Firmware Version: 1.1.0

As per title, could you please add SSID splitting feature. Sometimes the 5ghz signal dropped to 2.4 GHz when the signal is a slightly weaker, but the overall bandwidth throughput is still higher than 2.4ghz wifi. My area is congested with 2.4ghz interference. Keeping switching on and off wifi on devices is troublesome.

  1      
 
  1      
 
#1
Options
3 Reply
Re:Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature
2019-09-09 01:24:15

@jacktiew 

 

Hello, the latest firmware has added individual switches on both 2.4G and 5G networks.

 

If you want to keep devices connecting to the 5GHz to get better performance, you can go to more-wifi page to turn off the 2.4GHz. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature
2021-06-17 18:35:26
This isnt a option as some devices require 2.4ghz due to they are not dual band.
  0  
  0  
#3
Options
Re:Requesting 5Ghz & 2.4 GHz Wi-Fi SSID splitting feature
2021-06-17 19:20:58

@rath367 

 

This is how 2.4 GHz and 5 GHz SSID split can be configured for Deco mesh:

 

  0  
  0  
#4
Options

Information

Helpful: 1

Views: 6107

Replies: 3

Related Articles
Separate 2.4 ghz and 5 ghz on Deco M4
47629 7
5 GHz and 2.4 GHz
651 4
splitting wifi
411 0
Separate SSID for 2.4 and 5Ghz
461 3
WIFI configuration with seperate 2.4 and 5 Ghz
121 0
Archer C7 - Same SSID for 2.4 and 5 GHz
4641 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.