[REQUEST] Allow AP mode through Wifi
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Please add the option to use TL-WA850RE (V6) as Acess Point when connected through Wireless for extra security in the next firmware update. Currently it requires ethernet cable.
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, AP mode means that the extender need connect to the main router by wired cable.
If you want to connect the extender to the main router by wireless, you can configure it as a range extender which is designed to boost wifi signal.
Good day.
- Copy Link
- Report Inappropriate Content
Yes, you are right. Both AP mode and range extender are used to boost wifi signal. While the connection type is different. In AP mode, the extender need connect to the main router by wired cable to extend wifi, on the other hand, it connects to the main router's wireless to boost wifi signal in range extender mode.
As you mentioned on the title-- "Allow AP mode through wifi", actually it is the same as range extender mode. So you can decide which operation mode you will use.
Besides, if it is impossible to run a cable, then configure the extender as the range extender mode.
Below is the instruction:
https://www.tp-link.com/support/download/tl-wa850re/#video
https://www.tp-link.com/support/faq/698/
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Hello, AP mode means that the extender need connect to the main router by wired cable.
If you want to connect the extender to the main router by wireless, you can configure it as a range extender which is designed to boost wifi signal.
Good day.
- Copy Link
- Report Inappropriate Content
What is the difference? Connecting through wifi or cable it should provide the same functionality as long as it can reach the internet to serve the devices connected to it. It's not possible for us to run a cable.
- Copy Link
- Report Inappropriate Content
Yes, you are right. Both AP mode and range extender are used to boost wifi signal. While the connection type is different. In AP mode, the extender need connect to the main router by wired cable to extend wifi, on the other hand, it connects to the main router's wireless to boost wifi signal in range extender mode.
As you mentioned on the title-- "Allow AP mode through wifi", actually it is the same as range extender mode. So you can decide which operation mode you will use.
Besides, if it is impossible to run a cable, then configure the extender as the range extender mode.
Below is the instruction:
https://www.tp-link.com/support/download/tl-wa850re/#video
https://www.tp-link.com/support/faq/698/
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
It would be great to use different credentials to connect devices like in AP mode. After some research i understand why ap is usually done by wire.
Thank you for your patience.
This Thread can be deleted
- Copy Link
- Report Inappropriate Content
Thanks for your reply, glad to hear that you figured it out.
If you do not mind, I would like to keep this thread, because I believe there are some customers who have the same question like you, this post will help a lot.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 951
Replies: 5
Voters 0
No one has voted for it yet.