Home Network Community > All Threads > Archer A9 and NTP configuration
< All Threads

Archer A9 and NTP configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer A9 and NTP configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer A9 and NTP configuration
Archer A9 and NTP configuration
2019-10-16 22:11:21
Model: Archer A9  
Hardware Version: V6
Firmware Version: 1.0.3 Build 20190226 rel.62939(4555)

I have a router (Archer A9) not connected via WAN port.

It is only connected to switch via LAN port.

How can I configure obtaining time from NTP server?

 

I have an older router (with green web interface) also. I've set up static routing to NTP IP via my network default gateway and everything works fine - time is sychronized.

I cannot apply this "workaround" to Archer A9 with "blue" interface. Setting static routing doesn't work :(.

 

Is it posiible to have time synchorized with no connection via WAN port?

 

  0      
 
  0      
 
#1
Options
1 Reply
Re:Archer A9 and NTP configuration
2019-10-17 02:12:43

@TNO 

 

What does Archer A9 do now? Please show us the current network diagram. 

 

Generally speaking, once the A9 access internet, it can obtain time from NTP server automatically. 

 

If you do not use the WAN connection, you can configure the Archer A9 as an access point, then the main router still works as the DHCP server and manage the whole network. 

Note:You can login to the web UI of A9 and go to advanced-operation mode to change it as the access point mode; 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 707

Replies: 1

Related Articles
configure Archer A9 AC1900, as a secondary router
1847 0
Archer A9 mesh
892 0
OneMesh - Archer A9 and Archer C80
10462 2
OneMesh firmware for Archer A9
11103 10
OneMesh firmware for Archer A9
2498 0
Archer A9 - OneMesh availability
2658 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.