seperate wifi on 2,4 and 5
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
deco m9+(3pack)
possible to have different ssid name for 2,4 and 5 ghz wifi.(not guest network)
reason is simple, have a few iot devices(aqara hub and ismartgate) that need to only be on 2,4 wifi to work.
thanks for answer
Harald
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The are individual button for 2.4GHz and 5GHz, while they use the same network name under the mesh network. It cannot be customized to a different name.
Meanwhile, for the iot devices which supports 2.4GHz only, the 5GHz won't be detected by them, therefore they can connect to the 2.4GHz properly; if you worried about it, you can disable the 5GHz first and connect these iot devices to the wifi and re-enable 5GHz.
May it help.
- Copy Link
- Report Inappropriate Content
The are individual button for 2.4GHz and 5GHz, while they use the same network name under the mesh network. It cannot be customized to a different name.
Meanwhile, for the iot devices which supports 2.4GHz only, the 5GHz won't be detected by them, therefore they can connect to the 2.4GHz properly; if you worried about it, you can disable the 5GHz first and connect these iot devices to the wifi and re-enable 5GHz.
May it help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1308
Replies: 1
Voters 0
No one has voted for it yet.