Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > my TP-Link TL-WR941HP is nor workiing, only PWR led is on

< All Threads

my TP-Link TL-WR941HP is nor workiing, only PWR led is on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

my TP-Link TL-WR941HP is nor workiing, only PWR led is on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

moesank

2019-12-12 05:26:35

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-12-12

my TP-Link TL-WR941HP is nor workiing, only PWR led is on

2019-12-12 05:26:35

Model: TL-WR941HP

Hardware Version: V2

Firmware Version: unknown

i have a TP-Link TL-WR941HP.

it used to work properly. i set it as Wireless Router. but, suddenly the router become error. only PWR led is on. i tried to reset it many times by press the reset button for 10 seconds. but the only led on is only PWR led. even when i connected the lan port to my computer, the lan led was always off, but the phisical lan on my computer is connected(but i did't receive any ip address from the router dhcp) and there is not any wifi signal detected from the router. i also tried 30-30-30 reset mode, but the condition is still same, only pwr led is on, there is not any wifi signal detected from the router, teh dhcp server from the router doesn't work and i cannot reach it ip address (192.168.0.1) even using manual mode or dhcp mode.

1 Reply

Kevin_Z

2019-12-12 06:22:10

Posts: 21587

Helpful: 5042

Solutions: 2543

Stories: 21

Registered: 2018-12-24

Re:my TP-Link TL-WR941HP is nor workiing, only PWR led is on

2019-12-12 06:22:10

@moesank

Please ensure that you use the original power adapter; try to connect a cable from LAN 1 port to LAN 2 port on itself and verify whether the LAN leds come on.

Try to power cycle it first and then reset it by holding the reset hole for 10s with the router powered on.

You can click the wifi button on the back to turn on the wifi function and see whether it works.

Besides, what was the operation mode of it before you changed it to wifi router mode?

Can you login to the web UI now?

If it still cannot be fixed via the troubleshooting methods mentioned above, this device might be faulty; try to contact the retailer or the local tech support to verify whether a replacement is qualified with the serial number, proof of purchase.

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

moesank

2019-12-12 05:26:35

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-12-12

Information

Helpful: 0

Replies: 1

my TP-Link TL-WR941HP is nor workiing, only PWR led is on

my TP-Link TL-WR941HP is nor workiing, only PWR led is on

Information

Voters 0

Tags