Deco and Powerline
Hi I wish to know if I can connect my deco m9 plus with powerline adapters also from tplink, deco to powerline? Or modem to powerline then deco?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The Deco can work with the TP-Link powerline adapters together, but not the mesh network.
It is suggested to connect them like modem--main Deco -- PLC/slave Decos.
May it help.
- Copy Link
- Report Inappropriate Content
The Deco can work with the TP-Link powerline adapters together, but not the mesh network.
It is suggested to connect them like modem--main Deco -- PLC/slave Decos.
May it help.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hi thanks for replying, I have this star network setup, so correct me if my setup is wrong, I can do a modem--maindeco--switch--Powerline--slave decos, can i do this? Since my bedroom is on the 3rd floor, but its a loft type, so i need to connect a powerline then after slave decos
- Copy Link
- Report Inappropriate Content
Hello, you can do that. The main powerline adapter connects to the switch, and the second one connects to the slave Deco.
- Copy Link
- Report Inappropriate Content
quick question
here is my setup.
modem-->>deco9plus--tplink app speedtest 320Mbps) >switch-->PLC(av500) -->Wall
nextroom(deco9plus)-->PLC(av500)-->wall - getting 190 Mbps speedtest. When connecting laptop directly to PLC only getting about 60Mbps
bedroom(deco9plus)-->PLCav500-->wall. Getting about 200 Mbps Speeed test, When connecting laptop directly to PLC only getting about 70Mbps
backroom(Cisco AP 3702i) own Ssid) -->PLC--Wall only getting 30Mbps ?? Even connecting laptop directly to PLC. Any idea why? Shouldn't I get closer to 50-90Mbps? Since the PLC are 100Mbps adapters?
any clue what's wrong ? Or will my issue be fixed if using a gigabit PLC ??
do these Mesh AP know to use the faster link ? Which is mesh instead of the PLC link which gets less speed?
Thanks.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8678
Replies: 4
Voters 0
No one has voted for it yet.