Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Deco M5, expand with backhaul

< All Threads

Deco M5, expand with backhaul

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M5, expand with backhaul

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ChrisWUK

2019-12-29 09:22:17 - last edited 2021-07-06 02:17:40

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-12-29

Deco M5, expand with backhaul

2019-12-29 09:22:17 - last edited 2021-07-06 02:17:40

Model: Deco M5

Hardware Version: V1

Firmware Version: 1.3.2

Hi,

I have a network in my house of 4x Deco M5 units. This works really well.

I am building an extension to the house, and will add ethernet cables to the extension from the room with the main router.

Am I right in thinking I can purchase Deco M4 units, placing one connected to the router/modem and another in the extension connected by the ethernet cable. If I do this, the M5 units will feed of these two wired M4s and I will have total coverage?

Am I missing something?!?!?!?!

Thanks!

Chris

1 Accepted Solution

Alexandre.

LV6

2021-07-05 13:30:03 - last edited 2021-07-06 02:17:40

Posts: 4028

Helpful: 2341

Solutions: 534

Stories: 0

Registered: 2020-10-22

Re:Deco M5, expand with backhaul-Solution

2021-07-05 13:30:03 - last edited 2021-07-06 02:17:40

B72 wrote

@ChrisWUK

Deco cannot connect as mesh via network cable, they will have different wifi SSID.

@B72

This is not correct. Please see General questions about Ethernet Backhaul feature on your Deco

Recommended Solution

3 Reply

Kevin_Z

2019-12-30 03:23:40

Posts: 21600

Helpful: 5047

Solutions: 2545

Stories: 21

Registered: 2018-12-24

Re:Deco M5, expand with backhaul

2019-12-30 03:23:40

@ChrisWUK

Hello, Chris, for your information, you can add multiple Deco products together to build up the mesh network.

You can add the Deco M4 into the existing Deco mesh network to boost the wifi signal. You do not have to connect one of the Deco M4 to the modem, instead, you can add them as the repeater and connect them to existing Deco M5 to make it work.

While if you want to create a separate mesh network, you can connect one of the Deco M4 to the modem and configure it as the regular router. And then add the slave unit.

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

B72

LV1

2021-07-05 13:08:17

Posts: 6

Helpful: 4

Solutions: 1

Stories: 0

Registered: 2021-06-29

Re:Deco M5, expand with backhaul

2021-07-05 13:08:17

@ChrisWUK

Deco cannot connect as mesh via network cable, they will have different wifi SSID.

if you want to add them to same mesh you can only add them to existing mesh without cable.

However I believe tp-Link has other router products that can build a wifi mesh with cable but they are not Deco.

Alexandre.

LV6

2021-07-05 13:30:03 - last edited 2021-07-06 02:17:40

Posts: 4028

Helpful: 2341

Solutions: 534

Stories: 0

Registered: 2020-10-22

Re:Deco M5, expand with backhaul-Solution

2021-07-05 13:30:03 - last edited 2021-07-06 02:17:40

B72 wrote

@ChrisWUK

Deco cannot connect as mesh via network cable, they will have different wifi SSID.

@B72

This is not correct. Please see General questions about Ethernet Backhaul feature on your Deco

Information

Helpful: 0

Replies: 3

Deco M5, expand with backhaul

Deco M5, expand with backhaul

Information

Voters 0

Tags