Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

< All Threads

TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

tping

2020-01-01 14:23:54 - last edited 2020-02-24 12:02:23

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-01-01

TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

2020-01-01 14:23:54 - last edited 2020-02-24 12:02:23

Model: TD-W9977

Hardware Version: V1

Firmware Version: 0.6.0 2.10 v0022.0 Build 150519 Rel.57562n

Hi all,

will oder is there any firmware supporting VDSL2-Vectoring / ITU-T G.993.5 for this router from TP-Link?

N600
TD-W9980B(DE) v1 00000000

0.6.0 2.10 v0022.0 Build 150519 Rel.57562n

afaik the hardware Lantiq-VRX200 is capable of G.993.5 not only G.993.2.

German Telekom uses G.993.5 on their lines, so my N600 connects on a fallback profile only.

Thanks in advance

Dan

1 Accepted Solution

Kevin_Z

2020-01-07 08:42:50 - last edited 2020-02-24 12:02:23

Posts: 21780

Helpful: 5149

Solutions: 2575

Stories: 21

Registered: 2018-12-24

Re:TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support-Solution

2020-01-07 08:42:50 - last edited 2020-02-24 12:02:23

@tping

Hello, the TD-W9980B supports:

Standards VDSL2	ITU-T G.993.2
Standards ADSL	Full-rate ANSI T1.413 Issue 2 ITU-T G.992.1(G.DMT) ITU-T G.994.1 (G.hs) ITU-T G.995.1
Standards ADSL2	ITU-T G.992.3 (G.dmt.bis)
Standards ADSL2+	ITU-T G.992.5

Considering this device is end of life, I'm afraid that there is no firmware for it. While you still can keep an eye on official website for the updates.

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Recommended Solution

1 Reply

Kevin_Z

2020-01-07 08:42:50 - last edited 2020-02-24 12:02:23

Posts: 21780

Helpful: 5149

Solutions: 2575

Stories: 21

Registered: 2018-12-24

Re:TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support-Solution

2020-01-07 08:42:50 - last edited 2020-02-24 12:02:23

@tping

Hello, the TD-W9980B supports:

Standards VDSL2	ITU-T G.993.2
Standards ADSL	Full-rate ANSI T1.413 Issue 2 ITU-T G.992.1(G.DMT) ITU-T G.994.1 (G.hs) ITU-T G.995.1
Standards ADSL2	ITU-T G.992.3 (G.dmt.bis)
Standards ADSL2+	ITU-T G.992.5

Considering this device is end of life, I'm afraid that there is no firmware for it. While you still can keep an eye on official website for the updates.

Good day.

Information

Helpful: 0

Replies: 1

TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

TD-W9980B VDSL2 Vectoring / ITU-T G.993.5 support

Information

Voters 0

Tags