DHCPC teardown and release

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCPC teardown and release

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCPC teardown and release
DHCPC teardown and release
2020-01-03 09:48:26 - last edited 2021-07-20 03:13:42
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.0.12 Build 20190814 rel.62701(5255)

Роутер постоянно обрывает соединение с интернетом. Интервал от 15 минут до 1 часа. DHCPC выдает предупреждение send dhcp release.

  0      
  0      
#1
Options
1 Accepted Solution
Re:DHCPC teardown and release-Solution
2021-07-20 03:13:36 - last edited 2021-07-20 03:13:42

@Sathish_in 

 

Hello, as we can confirm that the "Teardown and Release" issue should have been addressed already, and it is suggested to upgrade your router firmware to the latest official version, then confirm.

 

Download link for the latest firmware:

Archer C6_V2: https://www.tp-link.com/support/download/archer-c6/v2/#Firmware

 

If any of you still encounters the "Teardown and Release" issue, please confirm some basic information as below:

1. Who is your ISP, and what is the WAN connection type on the C6, Dynamic IP or PPPoE?

2. Check and ensure the internet line or ISP modem is stable, bypassing the TP-Link router. Connect the PC directly to the ISP modem (or internet cable from wall), test and monitor the internet connectivity, ensure you have a stable connection. Check this guide for more suggestions: [Troubleshooting] Router Disconnects from Internet.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:DHCPC teardown and release
2020-07-24 20:06:05

@KENNYMC 

 

 

Hi I have the same issue, do you find what was the cause ? 

 

 

  0  
  0  
#2
Options
Re:DHCPC teardown and release
2020-10-02 04:09:54

@frPTY 

Hi 

 

I have the same issue with Archer C6, V2. Even flashing with earlier firmware doesnt help . Did you find any solutions  ? 

 

 

Thanks

Sathish

  0  
  0  
#3
Options
Re:DHCPC teardown and release-Solution
2021-07-20 03:13:36 - last edited 2021-07-20 03:13:42

@Sathish_in 

 

Hello, as we can confirm that the "Teardown and Release" issue should have been addressed already, and it is suggested to upgrade your router firmware to the latest official version, then confirm.

 

Download link for the latest firmware:

Archer C6_V2: https://www.tp-link.com/support/download/archer-c6/v2/#Firmware

 

If any of you still encounters the "Teardown and Release" issue, please confirm some basic information as below:

1. Who is your ISP, and what is the WAN connection type on the C6, Dynamic IP or PPPoE?

2. Check and ensure the internet line or ISP modem is stable, bypassing the TP-Link router. Connect the PC directly to the ISP modem (or internet cable from wall), test and monitor the internet connectivity, ensure you have a stable connection. Check this guide for more suggestions: [Troubleshooting] Router Disconnects from Internet.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options