TL-WR840N Got bricked
My TL-WR840N router got bricled due to wrong firmware upgrade, how can i recover it? Please help me :(
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, what is the current led status of the TL-WR840N?/
You can hard reset it and then try to use the firmware recovery to give it a go. Below is the instruction.
https://www.tp-link.com/en/support/faq/1482/
If it does not work, you can use TFTP to try again, if still the same, I'm afraid that there is not much we can do; You can order a new router with better performance.
Good day.
- Copy Link
- Report Inappropriate Content
Hello, what is the current led status of the TL-WR840N?/
You can hard reset it and then try to use the firmware recovery to give it a go. Below is the instruction.
https://www.tp-link.com/en/support/faq/1482/
If it does not work, you can use TFTP to try again, if still the same, I'm afraid that there is not much we can do; You can order a new router with better performance.
Good day.
- Copy Link
- Report Inappropriate Content
the router's all led coming on and off and it continues btw thank you
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 5828
Replies: 2