my ethernet port works one day, and the next no
I bought recently a wifi extender (RE450) and, at the start works perfectly, but one day, when the power went out, my ethernet port starts working rare, while the wifi works right, the ethernet connections work great one day, but the next works with a lot of lag and latency, especially when i play videogames
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the actual speed you can get from the RE450 by wired cable and wireless respectively?
Try to ping the gateway of main router and google.com, please show us the ping results as well.
Do you have the issue with the client connected to the main router directly bypass the RE450? Is there any advanced feature has been enabled on the main router? Like QoS or so?
Good day.
- Copy Link
- Report Inappropriate Content
hi Kevin, with my wired connection I have 90 Mbps and with wireless 160-150 Mbps. I'm paying 600 Mbps and i didn't enable anything on the router.
"Try to ping the gateway of main router and google.com, please show us the ping results as well" I don't understand what you mean
thank you.
- Copy Link
- Report Inappropriate Content
@Kevin_Z do you know any solution??
- Copy Link
- Report Inappropriate Content
Thanks for your valued reply.
For the wired speed, it is suggested to change another ethernet cable, like cat5e or above; then you can test the speed. Please ensure that the client connected to the RE450 has the gigabit ethernet port.
Next to the RE450, what is the wireless speed you can get from the RE450?
With computer connected to the RE450, you can open cmd page and try to ping the gateway and google.com. Like ping 192.168.x.x / ping google.com.
Note: The gateway is just an example, please enter the actual one.
Besides, please ensure that the firmware is up to date. And if possible, you can enable QoS on the main router and give video/games higher priority.
May it help.
- Copy Link
- Report Inappropriate Content
@Kevin_Z okey ty so much i will try it ;)
- Copy Link
- Report Inappropriate Content
@Kevin_Z should i select any configuration for DSCP or i don't touch anything????
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1096
Replies: 6
Voters 0
No one has voted for it yet.