RE 200 Wifi LED is red but WLAN is working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

RE 200 Wifi LED is red but WLAN is working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE 200 Wifi LED is red but WLAN is working
RE 200 Wifi LED is red but WLAN is working
2020-03-07 20:04:42 - last edited 2020-08-31 00:40:02
Model: RE200  
Hardware Version:
Firmware Version:

Hi all

 

I installed the RE200 today. After setting it up the floor above, the 2,4 G and 5 G LED are shining green but the WiFi LED is shining red. Nevertheless the Internet works on the clients. 

Does someone has an explanation for that?

 

Thanks a lot and best

 

Theo

  8      
  8      
#1
Options
2 Accepted Solutions
Re:RE 200 Wifi LED is red but WLAN is working-Solution
2020-08-31 00:39:13 - last edited 2020-08-31 00:40:02

@Colen 

Hi, have you tried to move the RE200 a little bit closer to the main router, then check if the LED would stay red?

PS:

Solid red

The extender is experiencing poor signal strength. Try relocating it closer to your host router.

Thank you

Recommended Solution
  0  
  0  
#10
Options
Re:RE 200 Wifi LED is red but WLAN is working-Solution
2021-01-05 10:36:11 - last edited 2021-01-06 02:36:56
Correction on this. It works. The solution is indeed to move the extender a bit closer
Recommended Solution
  4  
  4  
#12
Options
11 Reply
Re:RE 200 Wifi LED is red but WLAN is working
2020-03-09 07:57:14

@Theofrast 

 

Hi Theo, the flashing red wifi led means that the extender is experiencing poor signal strength. Try relocating it closer to your host router.

 

You can check the LED indicators explanation on the user guide also. 

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:RE 200 Wifi LED is red but WLAN is working
2020-03-13 22:47:08
  0  
  0  
#3
Options
Re:RE 200 Wifi LED is red but WLAN is working
2020-03-13 22:48:19
  0  
  0  
#4
Options
Re:RE 200 Wifi LED is red but WLAN is working
2020-03-14 19:38:13

@Kevin_Z 

 

Hi and thx. The strange thing is, though the LED is red, the Wifi signal is good.

 

Best

 

Theo

  0  
  0  
#5
Options
Re:RE 200 Wifi LED is red but WLAN is working
2020-03-17 06:41:37

@Theofrast 

 

Thanks Theo. 

 

It is normal that you can see the wifi network as long as the wifi led turns on, but what about the internet connection? Can you still surf the internet at that time? 

 

Meanwhile, as far as I know, there is no red led for WiFi led, could you please show us a picture of the led status when RE200 shows red? 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options
Re:RE 200 Wifi LED is red but WLAN is working
2020-06-11 08:21:49
Hi I'm currently experiencing similar issue where the light would turn red after a day. I have already shifted my router closer but the same issue seem to persist. It would also cause either one of my broadband(2.4 or 5ghz) to not work even when its connected. Either ip address cannot be obtained or no internet access.
  0  
  0  
#8
Options
Re:RE 200 Wifi LED is red but WLAN is working
2020-08-26 10:30:23

@Theofrast 

 

The same thing has happened to me.  Red wifi light is on but I can connect and internet connection is good enough to watch web-based streaming services.  Not sure why this is, did you get a solution?

  1  
  1  
#9
Options
Re:RE 200 Wifi LED is red but WLAN is working-Solution
2020-08-31 00:39:13 - last edited 2020-08-31 00:40:02

@Colen 

Hi, have you tried to move the RE200 a little bit closer to the main router, then check if the LED would stay red?

PS:

Solid red

The extender is experiencing poor signal strength. Try relocating it closer to your host router.

Thank you

Recommended Solution
  0  
  0  
#10
Options
Re:RE 200 Wifi LED is red but WLAN is working
2021-01-05 10:32:34
I Experience the same issue. I just updated the software and move the extender closer but still red light on wifi and green on 2.4 and 5 GHz Network
  0  
  0  
#11
Options
Re:RE 200 Wifi LED is red but WLAN is working-Solution
2021-01-05 10:36:11 - last edited 2021-01-06 02:36:56
Correction on this. It works. The solution is indeed to move the extender a bit closer
Recommended Solution
  4  
  4  
#12
Options

Information

Helpful: 8

Views: 19371

Replies: 11

Related Articles