Home Network Community > All Threads > Archer A9 - Parental Control - Time Limit
< All Threads

Archer A9 - Parental Control - Time Limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer A9 - Parental Control - Time Limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer A9 - Parental Control - Time Limit
Archer A9 - Parental Control - Time Limit
2020-03-19 04:45:09 - last edited 2020-03-19 08:19:03
Model: Archer A9  
Hardware Version: V6
Firmware Version: 1.0.4 Build 20190403 rel.63102(5553)

Hi all,

 

my scenario:

   - 2 devices in the profile

   - bed time 10pm to 8am

   - the time limit of a few hours per day

   - the kid usually uses up all the time allowance even before the bedtime and gets the "your time is up" message

   - not sure what happens between 10 pm and 8 am, but I presume they'd have got the "howling wolf" message had they tried to connect

 

my issue:

   - after 8 am both devices are still unable to connect, the router saying that "the time is up"

 

my workaround:

   - reboot the router

or (and that is ridiculous)

   - simply view details of any Parental controls profile in either Tether or the web page. I swear, as soon as you click a profile name in the list in Tether or click eiher "Insights" or "Edit" buttons on the web management page, the devices can successfully connect.

 

Upd. "Insights" show 0 minutes, obviously.

 

Is it a known problem? Any plans on delivering a solution? Should I return my router?

 

Thanks,

Bob

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Archer A9 - Parental Control - Time Limit
2020-03-20 03:34:38

@SilentBob_3135 

 

Hi Bob, what is the country version of your Archer A9? It is printed on the back label, next to the model number. 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer A9 - Parental Control - Time Limit
2020-03-20 03:47:00

@Kevin_Z 

 

Hi Kevin,

 

Bought from an Australian online retailer, but the label says US.

 

The router says it has the latest firmware.

 

Thanks,

SB

 

  0  
  0  
#3
Options
Re:Archer A9 - Parental Control - Time Limit
2020-11-16 01:50:34

@SilentBob_3135 I now this is an old post. Maybe it helps someone else.

Each device that has a restriction it's based on the client MAC address which is how the phone/laptop/tablet gets an IP via the DHCP server. When you reboot the router you're forcing the device to renew the DHCP lease.

You could try to reset the device. You can set the lease time to something less, the default is 120 min.

You might to also check that the time limits and the time allowed are not conflicting. For example the time limit resets at 12am and the time allowed is 8am-10pm. The restriction would still be in place pre 8am the same day.

If none of that works you can try address reservations or avoiding DHCP and see if using a staic IP works.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 812

Replies: 3

Related Articles
Archer AX20 Parental Controls - Time Limit
1221 0
Archer A9 mesh
893 0
OneMesh - Archer A9 and Archer C80
10470 2
Parental control - time restricting
647 0
Time left parental control
1132 0
How time limit calculated in parental control setting
2054 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.