Home Network Community > All Threads > Wi-Fi Move breaks MAC filtering
< All Threads

Wi-Fi Move breaks MAC filtering

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wi-Fi Move breaks MAC filtering

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wi-Fi Move breaks MAC filtering
Wi-Fi Move breaks MAC filtering
2020-03-19 11:49:40
Model: TL-WPA9610 KIT  
Hardware Version: V1
Firmware Version: 1.0.2 Build 20171018 Rel.62438

I have just purchased a WPA8630P to add to my existing network that includes a WPA9610. I'm using MAC filtering to permit client access to the network and have Wi-Fi Move enabled on both devices to clone the various settings including the MAC filter list to the other device.

 

Hoever Wi-Fi move appears to be broken - the MAC filter list was cloned as expected from the 9610 to the 8630P but no devices could connect to the 8630P. Turning off Wi-FI Move and then recreating the MAC filter list from scratch on the 8630P resolved the issue - devices in the filter list were able to connect and authenticate to the 8630P.

 

I've not discovered any other workaround other than the above.


The WPA8630P is hardware v2.1 and firmware version 2.1.0 Build 20171117 Rel.42724.

Jonathan.
  0      
 
  0      
 
#1
Options
1 Reply
Re:Wi-Fi Move breaks MAC filtering
2020-03-20 09:12:26

@36bits 

 

Hi Jonathan, we did a test at our end and the Wi-Fi move works well as expected. 

 

As for your case, we would like to follow up via email to do further analysis. If it is okay for you, please check your inbox and get in touch with us.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 559

Replies: 1

Related Articles
x60 and MAC Filtering
705 0
Whitelist MAC filtering, please!
32192 52
Mac filtering
785 0
MAC filtering
758 0
WiFi Move
1034 0
wifi mesh with whitelist/mac filtering
681 7
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.