Archer MR600 problems workink on 5 Ghz band
Hello i buy Archer MR600.
But it works bad.
In dual band mode 2 Ghz ant 5 Ghz the link and intenet disconect after 30 minutes.
ant it repeats all time.
Then i Turned Off 5 Ghz , disconeting repeats aprohiamtly after 1 h.
Why
Wireless chanell sets AUTO
I use acer mr600 as modem LTE signal is strong and works wine 4+G
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
We will do some troubleshooting to locate this issue and try to figure it out.
1. What is the led status of MR600 when it lose connection? Try to log in to the web UI and take some screenshots: advanced-status page, network-internet/dial-up page.
2. Who is the SIM card carrier? And have you ever tried to change another SIM card?
3. What about LAN connection? Does it lose internet as the wifi connection?
4. And may I know is it still connected to the wifi but no internet access or it disconnects wifi totally?
5. Try to change the wireless settings, including wireless channel and channel width.
6. Please ensure that the firmware is up to date.
Good day.
- Copy Link
- Report Inappropriate Content
Hello when internet hangs or disconects
i saw in my devices network wifi disapear
to wind firmware for this model very dificult
my acher mr600 V1
i use i think latest version https://www.tp-link.com/uk/support/download/archer-mr600/#Firmware Archer MR600(EU)_V1_190412
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
aurimasmal wrote
Hello when internet hangs or disconects
i saw in my devices network wifi disapear
to wind firmware for this model very dificult
my acher mr600 V1
i use i think latest version https://www.tp-link.com/uk/support/download/archer-mr600/#Firmware Archer MR600(EU)_V1_190412
@Diak66 ,
Yes this problem to go up and down of the wifi is known...
According me is connected with the hidden or ghost network wifi that need this network to connect in easy step the mesh devices but to the contrary make crazy the wifi network and especially the 2,4ghz.
I have requested to the tp-link techical to build and create one button to disable in the firmware settings this mesh network but i didn't receive answer!!!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2285
Replies: 5
Voters 0
No one has voted for it yet.