admin password not working for default gateway even after reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

admin password not working for default gateway even after reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
admin password not working for default gateway even after reset
admin password not working for default gateway even after reset
2020-04-03 06:44:35 - last edited 2020-04-07 07:53:22

Hi Experts,

 

I have TL-WR850N router. I want to login to default gateway (http://192.168.0.1/) 

 

Username field is not appearing. There is only password field. I tried password "admin' but it didn;t work. I reset my router and tried "admin" password again. Still it is not working. I also tried accessing through different browser, different device still no success. Please suggest,

 

TIA

 

 

 

  24      
  24      
#1
Options
1 Accepted Solution
Re:admin password not working for default gateway even after reset-Solution
2020-04-07 05:35:18 - last edited 2020-04-07 07:53:22

@pipa I reached out to my network provider and it is now working. 

Recommended Solution
  23  
  23  
#4
Options
12 Reply
Re:admin password not working for default gateway even after reset
2020-04-03 07:39:49

@pipa 

 

Try to hard reset the TL-WR850N once again, and please hold the reset button/hole for 10s with the router powered on. 

 

And then clear the browser cache and open a new incognito window to give it a go. 

 

Please ensure that there is no capital, it is admin, all in lower case. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  5  
  5  
#2
Options
Re:admin password not working for default gateway even after reset
2020-04-05 05:56:57

@Kevin_Z Thank you for your response.

 

I could see it is getting correctly reset since I need to enter default password to connect to the network. However, no luck with "admin" password on the default gateway. I tried resetting router again, disconnected all devices connected to the router, cleared browser cache. Still not able to see username field on default gateway and password "admin" is not working.

 

Please let me know if you have further suggestions.

  11  
  11  
#3
Options
Re:admin password not working for default gateway even after reset-Solution
2020-04-07 05:35:18 - last edited 2020-04-07 07:53:22

@pipa I reached out to my network provider and it is now working. 

Recommended Solution
  23  
  23  
#4
Options
Re:admin password not working for default gateway even after reset
2020-04-07 07:53:17

@pipa 

 

Thanks for your update, glad to hear that it works well now. 

 

May I know how did you make it work? Is it not admin anymore but be something else to log into the web UI? 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:admin password not working for default gateway even after reset
2020-05-01 16:02:35

@pipa the same thing happened with me please let me know how did you login it's a little urgent please help me

  0  
  0  
#6
Options
Re:admin password not working for default gateway even after reset
2020-08-18 09:38:24

@Kevin_Z I am facing same issue, i tried most of the things like hard reset, clearing browser and diffrenet browsers, restarting machine.

still no luck.

please let me know if there is any solution for this.

  0  
  0  
#7
Options
Re:admin password not working for default gateway even after reset
2020-08-18 10:55:16

@uchil I reached out to my network provider and it is now working

  4  
  4  
#8
Options
Re:admin password not working for default gateway even after reset
2020-08-19 17:26:44
but what they have done ? how they fixed this, if possible, Can u please ask them the solution.
  0  
  0  
#9
Options
Re:admin password not working for default gateway even after reset
2020-12-06 20:36:55

@uchil  if you are using the router given by ACT tplink archer c5 , the password it act@123. 

  38  
  38  
#10
Options
Re:admin password not working for default gateway even after reset
2021-06-03 22:27:19

@Kevin_Z 

 

There seems to be a lot of routers of tplink with the same faults, mine included, but the technical department keep giving out the same crap and are not helping... 

 

The rest doent work no matter which way yiu go.... Its just a crap router.... 

  7  
  7  
#11
Options

Information

Helpful: 24

Views: 35719

Replies: 12

Related Articles