TP Link W8961N - Router Failing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP Link W8961N - Router Failing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP Link W8961N - Router Failing
TP Link W8961N - Router Failing
2020-04-06 14:12:38 - last edited 2020-04-08 07:18:20
Model: TD-W8961N  
Hardware Version: V3
Firmware Version: 3.0.0 Build 170919 Rel.21648

Hi there,

 

I have a connection which drops quite often and I'm not too sure on what I'm looking for but I keep getting these errors in the system logs itself.

 

4/6/2020 11:9:57> dns2str too long 21
4/6/2020 11:9:57> dns2str too long 84
4/6/2020 11:9:57> dns2str too long 281
4/6/2020 11:9:57> dns2str too long 56
4/6/2020 11:9:57> dns2str too long 542
4/6/2020 11:9:57> dns2str too long 280
4/6/2020 11:9:57> dns2str too long 112
4/6/2020 11:9:57> dns2str too long 91
4/6/2020 11:9:57> dns2str too long 89
4/6/2020 11:9:57> dns2str too long 184
4/6/2020 11:9:57> dns2str too long 217
4/6/2020 11:9:57> dns2str too long 120
4/6/2020 11:9:57> dns2str too long 209
4/6/2020 11:9:57> dns2str too long 66
4/6/2020 11:9:57> dns2str too long 45
4/6/2020 11:9:57> dns2str too long 209
4/6/2020 11:9:57> dns2str too long 0
4/6/2020 11:9:57> dns2str too long 217
4/6/2020 11:9:57> dns2str too long 102
4/6/2020 11:9:57> dns2str too long 235
4/6/2020 11:9:57> dns2str too long 0
4/6/2020 11:9:57> dns2str too long 246
4/6/2020 11:9:57> dns2str too long 55
4/6/2020 11:9:57> dns2str too long 274
4/6/2020 11:9:57> dns2str too long 96
4/6/2020 11:9:57> dns2str too long 7
4/6/2020 11:9:57> dns2str too long 202
4/6/2020 11:9:57> netMakeChannDial: err=-3000 rn_p=80490368

 

WLAN:

Transmit Statistics
 
Receive Statistics
 
   Tx Frames Count
939,310
   Rx Frames Count
24,082,850
   Tx Errors Count
241,019
   Rx Errors Count
0
   Tx Drops Count
241,019
   Rx Drops Count
71

 

 

ADSL:

Transmit Statistics
 
Receive Statistics
 
   Transmit total PDUs
407,256
   Receive total PDUs
519,044
   Transmit total Error Counts
0
   Receive total Error Counts
0
 
 

 

Ethernet:

 

Transmit Statistics
 
Receive Statistics
 
   Transmit Frames
13,169,189
   Receive Frames
6,719,700
   Transmit Multicast Frames
89,617
   Receive Multicast Frames
32,818
   Transmit total Bytes
3,455,834,456
   Receive total Bytes
815,729,533
   Transmit Collision
0
   Receive CRC Errors
0
   Transmit Error Frames
0
   Receive Under-size Frames
0

 

 

Any help would be much appreciated please, thank you.

 

  1      
  1      
#1
Options
1 Reply
Re:TP Link W8961N - Router Failing
2020-04-08 07:18:11 - last edited 2020-04-08 07:18:20

@Vaulekai 

 

Hi, we need get some details to locate this issue and try to figure it out. 

 

1. What is the LED status of the TD-W8961N when it stops working?

 

2. Do both wireless connections and wireless connections disconnect from the router at the same time?

 

3. Try to log into the web UI of the TD-W8961N when it stops working and show us a screenshot of the status page. 

 

4. Besides, please ensure that the firmware is up to date. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  2  
  2  
#2
Options