Deco M5 firmware 1.4.4 broken
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Deco M5 firmware 1.4.4 broken
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After I install firmware 1.4.4 all my Decos keeps loosing connection between then. I was so happy with my Decos, but now It's a headache. I am in quarantine, couldn't leave and my decos are not working.
i have 3 decos. Main office with WAN connection. One in TV room and other in Service Area. Before upgrade, TV room deco connect easily with office on 5GHz and service area with TV room on 5 GHz as weel and good rate.
now, seen the app, connections on 2.4GHz and very poor signal.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Next to the TV room Deco or the service area Deco, can you get a good 5GHz signal from the front-end Deco, which is office Deco and TV room respectively.
You can turn off the 2.4GHz on the Deco app and verify whether they will connect to the 5GHz and its signal strength.
Try to move them closer to each other and check the Linked Deco/signal source.
And you can swap the location of the Deco units or switch the slave Deco to the main one to give it a shot.
https://www.tp-link.com/support/faq/2400/
Good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@PieroSimonassi Tenho usado aqui normalmente com a 1.4.4, 5 decos em casa, zero de problema.
- Copy Link
- Report Inappropriate Content
@leogz, aqui não funciona.
São 3 unidades deco m5 v3 distribuidos pelo apartamento, todas as unidades apresetam o mesmo problema no firwmare 1.4.4 e 1.4.2 em modo router ou ap.
O forum estão cheio de pessoas reclamando do mesmo problema, depois de algum tempo ligados eles começam a apresentar falha na navegação nos aparelhos conectado a rede deco (não importa se estiver conectado pelo wifi ou pelo cabo).
Tenho cerca de 26 equipamentos conectados a rede deco sendo grande parte dele equipamentos IoT. E simplismente param de funcionar do nada....
Já tentei usar a ferramenta GDPR.exe para voltar ao firmware 1.3.x sem sucesso.
Voltei o meu Archer C9 no lugar e encostei esse lixo de sistema, caro pra caramba e inutil.
- Copy Link
- Report Inappropriate Content
@Kevin_Z . Yes I can. BEFORE the 1.4.4 everything works fine. I have 3 Deco M5 for more than a year on the same place. Just now it happens. I don't think a link on how configure is the answer, sorry for that.
this is a BUG on. 1.4.4 firmware.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kiu how did you do it? I logged in on web and couldn't downgrade.
- Copy Link
- Report Inappropriate Content
go to https://tplinkdeco.net/ and that should help you to log in, then click on Advancded (at the top), then system then Firmware Update, from there select your device model and browse to the file you downloaded before.
Good Luck!
- Copy Link
- Report Inappropriate Content
@lfalcao One observation: You have to download the file. DECOMPRESS, Proof that it is easy, I have been able even ...
Firmware 1.4.2 is fine, no problems. Cheers
- Copy Link
- Report Inappropriate Content
@Kiu I know how to update firmaware but my deco don't accept downgrade for some reason.
and, WHEN Tp-Link will FIX IT? I am really think in throw this on garbage and buy some REAL WiFi MESH System.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 4996
Replies: 19
Voters 1
