Home Network Community > All Threads > Unable to access login page for W9970
< All Threads

Unable to access login page for W9970

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to access login page for W9970

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to access login page for W9970
Unable to access login page for W9970
2020-06-22 12:29:14 - last edited 2020-06-24 03:01:17
Model: TD-W9970  
Hardware Version:
Firmware Version:

I have just installed a w9970 in bridge mode to use with an existing Deco M5 mesh wifi system.

All devices connect and access the internet absolutely fine.

My Deco handles the DHCP, it is currently 192.168.0.2 and assigns ip addresses in the 192.168.0.3-254 range.

I was unable to access the w9970 via the 192.168.1.1 address, I would simply get an error pages.

 

I changed the ip address of the w9970 to 192.168.0.1. Now when I go to that address I simply get a tplink screen but with no option to login.

 

I've posted this in the Deco forum as well, as i'm unsure which forum would be best.

 

Many thanks

  0      
 
  0      
 
#1
Options
1 Reply
Re:Unable to access login page for W9970
2020-06-30 04:03:28

@Richyboy1980 

Hi, even though you change the LAN IP address of the bridge TD-W9970 to be the same network segment like 192.160.0.1, you can't enter the management page of it.

Since the Deco is the NAT device now, your wireless/wired devices can't across the NAT device directly to access the bridge modem's management page.

Besides, the bridge modem only takes effect of transfer the signal from telephone to Ethernet, your Deco devices get internet from the ISP directly.

 

If you want to enter the bridge modem's management page, you need to disconnect the Deco device and the modem first, connect your wireless/wired devices to the bridge modem directly to check if you can enter.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 770

Replies: 1

Related Articles
W9970 as access point
1716 0
I am unable to access router login page
610 0
Can't access login page
606 0
VOIP for TD-W9970
2336 0
unable to login to the home page
817 0
Unable to login to admin page
2900 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.