6
Votes

bandwidth control not available in ARCHER A6 AC1200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
 
6
Votes

bandwidth control not available in ARCHER A6 AC1200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
bandwidth control not available in ARCHER A6 AC1200
bandwidth control not available in ARCHER A6 AC1200
2020-06-26 12:11:02 - last edited 2022-10-27 09:49:07
Model: Archer A6  
Hardware Version: V2
Firmware Version: 1.3.0 Build 20200402 rel.51999

archar a6 ac1200 v2 bandwidth control not available for specifin ip/mac speed binding
only qos available which was not for specific

#1
Options
1 Accepted Solution
Re: bandwidth control not available in ARCHER A6 AC1200-Solution
2020-06-28 09:02:27 - last edited 2021-12-17 02:07:11

@bbiswas140 

 

Hello, thanks for reporting the issue to the community.

 

Sorry to say that the Archer A6 no longer supports the Bandwidth Control feature and it only supports QoS.
 

A6 supports IP/MAC binding and you may go to Security-IP & MAC binding to configure it.

 

Good days.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
#2
Options
14 Reply
Re: bandwidth control not available in ARCHER A6 AC1200-Solution
2020-06-28 09:02:27 - last edited 2021-12-17 02:07:11

@bbiswas140 

 

Hello, thanks for reporting the issue to the community.

 

Sorry to say that the Archer A6 no longer supports the Bandwidth Control feature and it only supports QoS.
 

A6 supports IP/MAC binding and you may go to Security-IP & MAC binding to configure it.

 

Good days.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
#2
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-05-04 11:51:10 - last edited 2021-06-23 01:35:33

@bbiswas140 please add support archer a6 ac1200 i need bandwidth control please update firmware for new future

#3
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-05-04 12:06:14 - last edited 2021-06-23 01:35:33

@bbiswas140 

Please add support 

Archer A6 version 3 ac1200

Bandwidth Control

Please add new future for update

 

#4
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-05-20 05:15:02 - last edited 2021-06-23 01:35:33
I have bought A6 V3 router yesterday. My old Mercysy 15$ router had bandwith control option . Im going to return this one back..
#5
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-05-20 06:00:07 - last edited 2021-06-23 01:35:33

@SamanthaLuv 

 

Hi, the Archer A6 v3 does not support bandwidth control (limit bandwidth per device), it only supports QoS. You can refer to the below instructions to get the configuration guidance:
https://www.tp-link.com/support/faq/2797/


We have feedback to the related department, and the bandwidth control feature will be available on the wireless routers in the future firmware update, but we cannot provide you an ETA, we cannot know which model will have it at the moment.


You are suggested to pay attention to the official website, or the new firmware notifications on your router web GUI for any new firmware updates.


If this functionality has determined the choice of equipment, you can return the router to the place of purchase as not as described.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
#6
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-05-29 15:00:43 - last edited 2021-06-23 01:35:33

@Kevin_Z 

Please, almost all the routers have Speed limiting option per device in the QOS, could you request the devs to add this feature in future?

 

#7
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-06-11 11:28:35 - last edited 2021-06-23 01:35:33

@bbiswas140  am also replying here becausei wish for the implementation of bandwidth control

#8
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-06-22 10:40:33 - last edited 2021-06-23 01:35:33

@bbiswas140 

Yes, Bandwidth Control is the most basic and really necessary feature that's missing in such high end router.
Very disappointing. My 10 years old 800 INR router has this feature.
Not sure how can someone make such idiotic decision to remove this must have feature. And QOS is not alternative of Bandwidth Feature(not sure why TPLink team gives this lame excuse). 
 

TPLink Team - Please add firmware update with bandwidth control feature for Archer A6 ASAP. 
Lack of this most basic and must have feature makes this great router literally unusable. 

#9
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-06-22 10:59:07 - last edited 2021-06-23 01:35:33

@Kevin_Z Bandwidth Control is the most basic and really necessary feature that's missing in such high end router.
Very disappointing.
Not sure how can someone make such idiotic decision to remove this must have feature. And QOS is not alternative of Bandwidth Feature(not sure why TPLink team gives this lame excuse). 
 

TPLink Team - Please add firmware update with bandwidth control feature for Archer A6 ASAP. 
Lack of this most basic and must have feature makes this great router literally unusable. 

#10
Options
Re: bandwidth control not available in ARCHER A6 AC1200
2021-06-22 18:41:35 - last edited 2021-06-23 01:35:33

@ bbiswas140 

Qué triste de verdad que mi Tp-link TL-WR941ND, es de tecnología antigua y tenga mejores prestaciones para el manejo de ancho de banda que uno nuevo, eso era una de las características principales por lo que uno buscaba los Router de esta marca, laméntable tener que vender mi Router nuevo por una mala decisión operativa y ahora si necesitara un router que maneje bandwidth, tendré que mirar otras marcas 

 

How sad really that my Tp-link TL-WR941ND, is of old technology and has better benefits for bandwidth management than a new one, that was one of the main characteristics for what one was looking for the Routers of this brand, sorry to have to sell my new router for a bad operational decision and now if I need a router that handles bandwidth, I will have to look at other brands
#11
Options

Information

Helpful: 6

Views: 6336

Replies: 14

Voters 4

voter's avatar
voter's avatar
voter's avatar
voter's avatar