Sonos won't connect to Archer AX6000
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
Recently changed my router from a Linksys WRT1900ACS running Luci firmware to a TP link Archer AX6000 - my Sonos speakers refuse to connect to the 2.4GHz wifi on the AX6000.
Sonos kit:
2x One, 1x One SL, 1 x Play:1, 1x Ikea Symfonisk bookshelf - I’ve upgraded to S2.
All my non-Sonos 2.4GHz kit works fine with the new router. I’m running with duplicate SSIDs for 2.4 and 5 GHz I’ve tried with and without smartconnect. I’ve also tried setting up a totally new 2.4 GHz SSID. I’ve tried turning AP isolation on and off (usually off on my non guest networks). Speaker location isn’t an issue here - I’ve been trying the below with the speakers a short distance from the router.
Tried the following via the app:
Going through the ‘changed router/wifi settings’ journey
Wiping the app and factory resetting the speakers.
Joining the speakers using the ‘accessory configuration’ process (Apple native)
Joining the speakers using the ‘select SSID and type in password’ process
Connecting one speaker with a wired connection (this all works until I disconnect the wired speaker at the end of the process.) I didn’t check whether the wireless speakers connected over Sonosnet were also visible as airplay devices. I don’t want to run with one wired sonos (this will involve digging out my old powerline ethernet kit to keep the speakers in the same places - I’d rather not).
No matter what the process, the Sonos app generally fails at the step of adding my wifi network (in a couple of cases the app appears to complete this process but then I can’t see any speakers).
Interestingly the speakers are connecting to the router - I can see them in the list of DHCP leases, and I can ping them, they just aren’t visible in the app. Makes me think there is some kind of peer to peer comms thats not working between the speakers/phone running the app.
In the end, I reconfigured the old Linksys router to be an AP (no firewall or DHCP services) added a different SSID and plugged it into a TP-Link LAN port. The Sonos speakers work fine with that, only wrinkle is that the phone running the Sonos app has to be on that new SSID to add new speakers - it can be on the main SSID (same subnet) to use Sonos (either natively or Airplay2).
So I have things working again, but I don’t want to run both routers long term. Any ideas?
Justin
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
If you still encounter any communication issue between the 2.4G and 5G connection, please try to upgrade the below beta firmware and get back to us, thanks:
https://static.tp-link.com/2020/202007/20200713/ax6000v1_us-up-ver1-1-2-P3[20200709-rel81803]_sign_2020-07-10_10.57.45.zip
How to upgrade it?
How to Upgrade the Firmware on the TP-Link Wi-Fi Routers
Let me know if the issue is resolved or not. Have a nice day.
- Copy Link
- Report Inappropriate Content
Hi,
thanks - can you confirm whether I would be able to downgrade to the previous beta firmware, if I upgraded to this one and it made things worse?
the router has been stable as long as I don't touch the config. So I want to minimise changes on it.
Justin
- Copy Link
- Report Inappropriate Content
Hello, sorry that this latest beta firmware will not be allowed to downgrade to the previous beta.
However, if there is still an issue after upgrading to this beta, our engineers will help with the downgrade as the whole process is a little bit complicated.
- Copy Link
- Report Inappropriate Content
Want to add that I had the exact same issue w/ Sonos speakers as well (all other devices working fine and there are 16 of them, so this does seem to be an issue that is specifically impacting something Sonos requires to function)
Contacted Sonos support who had me change the 2.4ghz network to a manually-set channel (11), and that seemed to have resolved the issue for the past few weeks. Wanted to mention this as a datapoint bc Justin had mentioned that setting the channel manually seemed to be related in some way for his case as well. I am on the latest public firmware release, haven't tried the beta. I cannot get the speakers to connect at all with Smart Connect turned on or with Smart Connect off but with the 2.4ghz channel selection set to auto. This morning, several of the speakers again disappeared from the Sonos app (depsite not changing any router settings, and despite them appearing as connected in the router's settings page). In this case for some unknown reason my laptop was able to get them connected again but phone was not.
@Kevin_Z Will the beta firmware presumably make it to a production release once these issues are ironed out? I'm also considering returning the router because of these issues with very basic functionality. I previously had a very old, inexpensive router in place with absolutely no issues and this one has proven not to be much of an upgrade unfortunately :(
@JustinW Have you been able to give the newer beta firmware a try? Any luck? For what it's worth, my Beam always stays connected, only the 2x Ones have the issue...very odd.
- Copy Link
- Report Inappropriate Content
@Eab6287 I haven't tried the second beta firmware yet.
The router has been pretty stable on the first beta so far (as long as I don't touch the settings). I haven't noticed the loss of a single speaker.
also with working from home I can't afford to risk introducing instability. Might try it this week though.
I think the Sonos devices are highly reliant on diect comms with each other, and this router keeps switching back to endpoint isolation.
Justin
- Copy Link
- Report Inappropriate Content
@Kevin_Z any updates on this issue?
- Copy Link
- Report Inappropriate Content
Hello, sorry to respond late.
You may try the below beta and monitor the result:
Let me know if there is an issue, thanks.
- Copy Link
- Report Inappropriate Content
I have downloaded this firmware updated and successfully installed it on my AX6000. I have been having the same issues as others on this thread, not only with my SONOS system but with Roku and other devices that need to communicate with each other on my network for them to work. I have SmartConnect enabled and after installing this firmware, so far, all my devices are now working properly. My Sonos system can see all the Sonos devices across the network. I will update if I have any issues but so far so good!
@Kevin_Z Once the beta firmware has been successfully tested and has become a general release, will my router automatically updated to the general release version? Also, is there any timeline for when this will be a new general firmware release?
- Copy Link
- Report Inappropriate Content
The router will notify you of a firmware update is available. Up to you if you're brave enough to install it
- Copy Link
- Report Inappropriate Content
This Beta firmware fixed the same issue for me, as well as with other devices a WEMO Dimmer Swithc and a Cannon all in one printer, both stoped working on wifi
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8207
Replies: 25
Voters 0
No one has voted for it yet.