Deco M5 Power Adapter

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M5 Power Adapter

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M5 Power Adapter
Deco M5 Power Adapter
2020-07-10 03:48:21 - last edited 2020-07-30 08:18:08
Model: Adapter  
Hardware Version: V3
Firmware Version:

Hello.

 

I got a Deco M5 mesh wifi system.  I am looking forward to install one of the devices on a wall; the issue is with the power adapter (not long enough).

 

I wan to use a PoE splitter (TP Link TL-POE1R), but I need to be sure about the Deco's barrel diameter to get the adapter.

 

- External diameter : 5.5 mm

- Internal diameter: 2.1 or 2.5 mm? (not sure if it is 2.1mm or 2.5 mm).

 

Can you confirm the diameter so I get the right size adapter?

  4      
  4      
#1
Options
1 Accepted Solution
Re:Deco M5 Power Adapter-Solution
2020-07-30 08:17:56 - last edited 2021-10-27 01:33:31

@AlvaroMG 

 

Hello,

 

Sorry that the Deco M5 doesn't support PoE and it needs to be powered on by the supplied power adapter, which it's a USB Type-C connector for V1, and DC output for V2 & V3.

 

Good days.

Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:Deco M5 Power Adapter-Solution
2020-07-30 08:17:56 - last edited 2021-10-27 01:33:31

@AlvaroMG 

 

Hello,

 

Sorry that the Deco M5 doesn't support PoE and it needs to be powered on by the supplied power adapter, which it's a USB Type-C connector for V1, and DC output for V2 & V3.

 

Good days.

Recommended Solution
  0  
  0  
#2
Options
Re:Deco M5 Power Adapter
2021-01-14 17:59:17

@TP-Link_Deco 

The versions shipping now are not USB-C, I've got three V3 units and they are not USB-C.

I seem to recall seeing that USB-C power was dropped after V1, and V2 M5 onwards were supplied with 12V/1.2A barrel connector.

Now the question still stands, what size...
I'm going to try getting a POE converter to test this out as I need to do the same. Will get back with an update on the outcome at some point.

  1  
  1  
#3
Options
Re:Deco M5 Power Adapter
2021-09-03 07:57:17

@HerbertGoat same question here.

  0  
  0  
#4
Options
Re:Deco M5 Power Adapter
2021-10-26 12:09:08

@HerbertGoat 

 

Hello 

You will need size: DC5.5x2.1mm

(5.5mm external, 2.1mm internal)

and since the supply power needed is:

12V 1.2A, you will need at least 1.2A in the splitter.

Hope this can help.

  4  
  4  
#5
Options
Re:Deco M5 Power Adapter
2021-11-27 12:56:03

Thanks for the feedback @Ccarlos , much appreciated

However, for various reasons I decided to ditch Deco and have changed to an Omada setup instead

  1  
  1  
#6
Options

Information

Helpful: 4

Views: 8859

Replies: 5

Related Articles