Can´t open Speedport Configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can´t open Speedport Configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can´t open Speedport Configuration
Can´t open Speedport Configuration
2020-07-13 08:30:18
Model: Deco P7  
Hardware Version: V1
Firmware Version: 1.4.2 Build 20200408

Hello,

 

i´m using my Deco P7 in AP Mode.

 

I have a problem connecting to the configuration of my Speedport Router.

 

I can´t open it via "speedport.ip" and even not via 192.168.2.1 (the IP from my speedport router). Default gateway, DHCP Server and DNS Server is 192.168.2.1. I can Ping the router and if i do a tracert it shows me that it goes to the router succesfully.

 

If i connect to the router via LAN it works. It shows me every connected device so as far as I understand the Decos are using the DHCP from the speedport router.

 

Anyone had the same problem?

 

I tested it on 2 PCs and even on my Smartphone.

 

Thank you!

  0      
  0      
#1
Options
1 Reply
Re:Can´t open Speedport Configuration
2020-07-24 03:46:33

@Jaksa 

 

Hello, sorry to hear that. We can do further troubleshooting and try to fix it.

1. What is the desired network topology/diagram? And how many Deco P7s in your network?

2. With a computer connected to the main P7 wireless, please check what is the IP address and default gateway it obtained.
https://www.tp-link.com/support/faq/838/

3. Try to power cycle the Speedport Router and the Deco P7 to give it a go.

 

Thanks.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1136

Replies: 1

Related Articles