TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2020-08-06 18:58:14 - last edited 2020-08-07 05:58:37
Model: TL-WR845N  
Hardware Version: V1
Firmware Version:

The signal is getting disconnected every 1 or 2 hours, need to switch off and switch on the router to gain back the connectivity.
 

Is there any solution for this or anyone else facing the same issue as I am facing. The signal will be lost but the light on the router is green, 

 

Please let me know can we fix this issue if I take it to the service center

  4      
  4      
#1
Options
1 Accepted Solution
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.-Solution
2020-08-07 05:58:32 - last edited 2020-08-07 05:58:37

@Devaraju 

 

Hello,

 

Please help verify some details and we will try to figure it out:

1. May I know who is your internet service provider and what is the current network topology? Is the wireless connection unstable or both wired and wireless connections are having issues?

2. When they got disconnected, is the wireless network of the WR845N still broadcasting or the wireless network is no longer available on all devices?

3. If only the wireless is not stable, try to modify the wireless settings on the WR845N first, such as wireless channel, channel width, which would help in some cases:
https://www.tp-link.com/support/faq/2292/

4. If both wireless and wired connection are not stable, please try to connect your computer to your ISP modem directly and ensure that connection is stable, then try to reset the WR845N and reconfigure it from scratch.

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
18 Reply
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.-Solution
2020-08-07 05:58:32 - last edited 2020-08-07 05:58:37

@Devaraju 

 

Hello,

 

Please help verify some details and we will try to figure it out:

1. May I know who is your internet service provider and what is the current network topology? Is the wireless connection unstable or both wired and wireless connections are having issues?

2. When they got disconnected, is the wireless network of the WR845N still broadcasting or the wireless network is no longer available on all devices?

3. If only the wireless is not stable, try to modify the wireless settings on the WR845N first, such as wireless channel, channel width, which would help in some cases:
https://www.tp-link.com/support/faq/2292/

4. If both wireless and wired connection are not stable, please try to connect your computer to your ISP modem directly and ensure that connection is stable, then try to reset the WR845N and reconfigure it from scratch.

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2020-11-23 14:37:59

@Devaraju 

 

Hi @Kevin_Z,

Thanks for the resolution steps, I have tried almost all the option. There is no issue from the internet provider, I have tried connecting the cable directly to laptop it works fine there is not interupt in the internet, it happens only when i connect through the router.

 

I have purchased the router from Amazon, please let me know how to fix this issue, restarting the router has become an regular activity for me now and am regretting to choosing the TP-Link router.

 

1. Complete reset.

2. Changed internet provider too.

3. Changed configuration as we like, channel, width and etc.

 

but still no luck, please help me to resolve the issue.

  1  
  1  
#3
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2020-11-24 02:03:34

@Devaraju 

 

Hello, thank you for getting back. Can we just confirm again if the issue is the wireless signal of the WR845N will disappear and no device can "see" it? Or the devices show connected to the wireless but no internet access?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2020-12-18 22:01:37 - last edited 2020-12-18 22:02:57

@Kevin_Z 

 

The issue is the wireless signal of the WR845N will disappear

i required to restart router to get back signal

 

kindly provide solution for this i'm tired with this router 

 

as per cummunication with support team updated firmware as well still same problem with it

 

Not happy with router WR845N

 

 

  0  
  0  
#5
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2020-12-21 01:43:00

@Sadik_Tamboli 

 

Hi, I have sent you a PM, please check and confirm, thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2021-02-02 02:05:27

@Kevin_Z 

 

ok,

 

i have taken Tenda router which is working fine that means TP-Link router has issue with it self 

If such issue contine Tp-Link gona loose somany customers 

  0  
  0  
#7
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2021-02-02 07:06:52

@Sadik_Tamboli 

 

I see, please kindly confirm if the firmware I sent you helps, thank you.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2021-02-04 07:05:57

@Kevin_Z 

I am also having the same issue. After every 2 hours I have to restart the router by unplugging. Pls help

  1  
  1  
#9
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2021-02-04 09:51:23

@Anurag22 

 

Thank you for posting on the TP-Link Community.

 

Do you mean the wireless network will disappear on the WR845N? Have you tried my previous suggestions to Devaraju? Please kindly provide more info, then we will try our best to figure it out.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:TP-LINK TL-WR845N - Connectivity issue, no signal every 1-2 hours once restart.
2021-02-04 11:55:42

@Kevin_Z 

The signal disappears every 2-3 hours. No device can detect the wifi. The lights are showing green. There is no issue from ISP. I have tried changing channel width, etc. But doesn't work

  0  
  0  
#11
Options

Information

Helpful: 4

Views: 4140

Replies: 18

Related Articles