Can't set static ip

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't set static ip

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't set static ip
Can't set static ip
2020-08-13 04:45:25 - last edited 2020-08-14 06:45:19
Model: Archer C6  
Hardware Version: V2
Firmware Version: 020110

I went to the router setup page and found out there was the latest firmware available for upgrade. I upgraded to it from the router page and after upgrade, the router got bricked.

I had to manually reset the router using a tool called tftpd64.452. 

There was 3 firmware available. I used the 2nd one to revert back to.

Now I can sometimes access the login page and even if I do I can't save the settings when I enter static IP details. It always reverts to dynamic ip.

I'm using wired-broadband (alliance) network.

 

Please help.

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Can't set static ip-Solution
2020-08-14 06:41:53 - last edited 2020-08-14 06:45:19

@Suvrojit 

 

Hello, sorry about that.

 

If this is the case, it is suggested to contact the local tech support again to check for the warranty as this router might be faulty.

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Can't set static ip
2020-08-14 06:04:54 - last edited 2020-08-14 06:45:08

@Suvrojit 

 

Hello,

 

Does it mean the WAN connection type will go back to Dynamic IP after you change it to Static IP and save it? Please reset the router to factory defaults again via the web interface as below:

https://www.tp-link.com/support/faq/497/  (Method 2)

 

If this makes no difference, try to upgrade the firmware to the latest manually, and here is the download link:

https://www.tp-link.com/support/download/archer-c6/#Firmware

 

Below is the guidance to update it:

https://www.tp-link.com/support/faq/2139/  (Case 1)

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Can't set static ip
2020-08-14 06:36:55 - last edited 2020-08-14 06:43:57

@Kevin_Z 

 

Hi I called technical support today and after reset I was told to upgrade to the latest firmware - Archer C6(EU)_V2_200630 (which I did the first time) and my router got bricked again (only POWER LED SOLID ON). I tried to reset but the same thing. 

Previously I tried the same thing and I had to revert to the earlier two firmware using this tool tftpd64.452

 

do I need to use the tool again to revert back to previous firmware? Also why there is a broken firmware uploaded in the website?

 

what to do now?

  0  
  0  
#3
Options
Re:Can't set static ip-Solution
2020-08-14 06:41:53 - last edited 2020-08-14 06:45:19

@Suvrojit 

 

Hello, sorry about that.

 

If this is the case, it is suggested to contact the local tech support again to check for the warranty as this router might be faulty.

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1141

Replies: 3

Related Articles