Option to switch between 4G bands on Archer MR400

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Option to switch between 4G bands on Archer MR400

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Option to switch between 4G bands on Archer MR400
Option to switch between 4G bands on Archer MR400
2020-08-15 13:56:57 - last edited 2020-08-18 00:58:40
Model: Archer MR400  
Hardware Version: V2
Firmware Version: 1.9.0 0.9.1 v0001.0 Build 190307 Rel.45273n

My internet actively switches between 4G bands 1, 3 , and 40 that's causing frequent internet disconnection. Speed varies from the band that my network is on, which is frustrating. Want to be able to switch between band and lock on to a particular band. Is there a beta firmware that allows me to do this?

 

Thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Option to switch between 4G bands on Archer MR400-Solution
2020-08-18 00:40:31 - last edited 2020-08-18 00:58:40

@raghavadhithya 

Good day.

I saw that you have already got the beta firmware and well doneyes.

PS:For some else who might need it:

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

 

Note: This beta firmware is working for MR200(EU) V3/V4, MR400(EU) V2/V3, MR6400(EU) V3/V4

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
9 Reply
Re:Option to switch between 4G bands on Archer MR400-Solution
2020-08-18 00:40:31 - last edited 2020-08-18 00:58:40

@raghavadhithya 

Good day.

I saw that you have already got the beta firmware and well doneyes.

PS:For some else who might need it:

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

 

Note: This beta firmware is working for MR200(EU) V3/V4, MR400(EU) V2/V3, MR6400(EU) V3/V4

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
Re:Option to switch between 4G bands on Archer MR400
2020-08-18 00:59:29

@Sunshine Yes, thank you, sir. 👍🏾

  0  
  0  
#3
Options
Re:Option to switch between 4G bands on Archer MR400
2021-02-07 20:56:25 - last edited 2021-02-07 23:48:58

@Sunshine

Is there a newer firmware I noticed MR600 seem to have one?  Also I wondered why the beta firmware is a lot smaller than the v4 firmware from support site

  0  
  0  
#4
Options
Re:Option to switch between 4G bands on Archer MR400
2021-03-07 18:11:37

@Sunshine 

 

Same problem as OP but my Hardware version is MR400 V4. It is really annoying (to work from home) with router switching bands automatically.  Please see that Band 5 and Band 3 are stable with more than 5Mbps speed while the router thinks that Band 40 is best. When this happens Band 40 offers 0kbps upload speed and abysmal download speeds like 0.xx Mbps. Please allow users to stick to a specific band and change when there is network congestion.

 

To the powers above in TP-Link ---- > Locking bands is a must have feature for 3G/4G routers.

  0  
  0  
#5
Options
Re:Option to switch between 4G bands on Archer MR400
2021-03-08 10:18:57

@Sunshine 

 

Could you confirm that the today's new firmware update includes the option to switch between 4G bands?

 

Thank you

 

  1  
  1  
#6
Options
Re:Option to switch between 4G bands on Archer MR400
2021-03-09 09:27:01

@attanasio89 

Hi, I am afraid the latest firmware still did not add the option to switch between 4G bands.

Thank you.

  1  
  1  
#7
Options
Re:Option to switch between 4G bands on Archer MR400
2021-05-13 06:15:33

@Sunshine this is not working for Archer MR400 v4 00000001 .. can you help me with correct one

  0  
  0  
#8
Options
Re:Option to switch between 4G bands on Archer MR400
2021-10-27 20:49:22

@Sunshine I have also same problem (can't lock band) with my MR400(EU) V1.

is there any beta firmware for MR400(EU) V1 ?

  0  
  0  
#9
Options
Re:Option to switch between 4G bands on Archer MR400
2022-04-18 04:27:48

Please where is link to download 

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 3730

Replies: 9

Related Articles