Slow 2.4ghz band

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Slow 2.4ghz band

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Slow 2.4ghz band

Charles69

2020-08-17 14:31:49 - last edited 2020-08-18 08:45:06

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2020-08-17

Slow 2.4ghz band

2020-08-17 14:31:49 - last edited 2020-08-18 08:45:06

Model: Archer AX20

Hardware Version: V1

Firmware Version: 1.1.1

Good day all,

I've been having a problem with my 2.4ghz band not being able to even reach a proper 70mbps despite having a 100mbps line. The 5ghz band works fine. I've tried everything I can think of, factory resetting about 4 times already, messing with settings and moving the location of the router. Nothing seems to work. At best, my network speed says 98mbps but only gives around 75mbps on the test. I've got an older zyxel router which has no problem of reaching 100mbps on the 2.4ghz band. Any ideas what could be the problem or what could be done to mitigate the issue, thanks.

1 Accepted Solution

Kevin_Z

2020-08-18 08:44:47 - last edited 2020-08-18 08:45:06

Posts: 21546

Helpful: 5007

Solutions: 2536

Stories: 21

Registered: 2018-12-24

Re:Slow 2.4ghz band -Solution

2020-08-18 08:44:47 - last edited 2020-08-18 08:45:06

@Charles69

Hello,

As for the 2.4GHz wireless speed issue you reported, please help confirm below:

1. What kind of devices are connected to the 2.4GHz wireless? How about the link speed on it when the speed drops? If it is a computer, you may check it like below:
https://www.tp-link.com/support/faq/2265/
Note: If the link speed is not as good as expected, please try with another computer with a more powerful wireless adapter. BTW, tell us the model number of that wireless adapter that runs on your computer.

2. Are you testing the speed by speedtest.net? Please try to download the Speedtest app on your computer and simplify your network layout if there are other routers or RE in your network, just leave the modem and the AX20 on, disconnect other devices and run the Speedtest app 3 times. Please ensure the 2.4GHz wireless channel width is set to 40MHz.

3. Please disable QoS on the AX20 or try to reset it to the factory defaults, then reconfigure it from scratch.

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Information

Helpful: 1

Replies: 1

Slow 2.4ghz band

Slow 2.4ghz band

Information

Voters 0

Tags