Home Network Community > All Threads > IGMP Proxy / IPTV Issue - Archer C80 AC1900
< All Threads

IGMP Proxy / IPTV Issue - Archer C80 AC1900

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IGMP Proxy / IPTV Issue - Archer C80 AC1900

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IGMP Proxy / IPTV Issue - Archer C80 AC1900
IGMP Proxy / IPTV Issue - Archer C80 AC1900
2020-08-23 19:40:48
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.4.6 Build 200628

Hi, I have this router   It is not 1500, but  "Model dropdown" does not show 1900 - C80

 

 

I am trying to set my WAN (PPPoe) and IPTV.

 

Wan PPPOE is OK but IPTV is not working. According to my provider the configuration for IPTV is as follows:

 

VLAN ID 105

Priority 4

IGMP Proxy activated

IGMP Snooping not needed

 

 

The problem is that IGMP Proxy setting is not on my C80 tabs !  I can't find it  so I can turn it on.

 

Internet is working.

IPTV is not working, it seems I does not get Internet because time and EPG is not updated.

 

 

Any suggestions?

 

 

 

 

 

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:IGMP Proxy / IPTV Issue - Archer C80 AC1900
2020-08-26 06:25:43

@SKR 

 

Hello,

 

IGMP Proxy is enabled by default and there is no option to disable it.

 

As for your settings on the C80, please change the LAN port to IPTV but not VoIP, then confirm again:

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:IGMP Proxy / IPTV Issue - Archer C80 AC1900
2020-08-26 07:03:49 - last edited 2020-08-26 10:16:14

@Kevin_Z  Hi ! thanks for your reply

 

That was my fault when taking the Screenshot, it is actually set as "Iptv"

 

 

Thanks for your confirmation about IGMP Proxy, that will not be a problem anymore.

 

 

In any case, IPTV is still not working.

 

Lan ports for Internet are working fine.

IPTV lan port  is not working, it seems I does not get Internet because time and EPG is not updated. Its like... "Ok, I am working with VLAN ID 105, but I dont know about VLAN ID 100"

 

Maybe this latest test would help to understand:

 

Test based on current posted image configuration (Lan 1& 2 Internet, Lan 3 Iptv)

 

  • Lan 3 is changed into "internet" -->  The IPTV Decoder (Vodafone Spain) gets time and EPG
  • Lan 3 is reverted to IPTV --> TV  current channel shows images, it works
  • As soon as I select other channel, the image is gone and I can't see anything, no matter the channel

 

 

Thanks for your help !

 

 

 

 

  0  
  0  
#3
Options
Re:IGMP Proxy / IPTV Issue - Archer C80 AC1900
2020-08-26 08:04:31

@SKR 

 

Hello,

 

What do you mean by Deco? Is there any Deco mesh device in the same network? If so, may I know your detailed network topology and how are they connected?

 

Who is your ISP?

 

Please send us the whole system log on the C80 and we will analyze it further then update, thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:IGMP Proxy / IPTV Issue - Archer C80 AC1900
2020-08-26 10:22:26

@Kevin_Z sorry, that was a language mistake.

 

I meant IPTV Decoder (Vodafone Spain)  

 

Network topology is:

 

Vodafone Spain FTTH ONT - Tplink Archer C80 WAN (PPOE) - 3 ethernet devices (Lan 1 = Internet, Lan 2 = Internet, Lan 3 = IPTV  , according to VLAN IDs shown in the previous image)

 

The Archer C80 is now boxed and ready for a packet return  because I had no hope  :-(   I will try to get a log before the courier arrives

  0  
  0  
#5
Options
Re:IGMP Proxy / IPTV Issue - Archer C80 AC1900
2020-08-26 14:24:03 - last edited 2020-08-26 14:37:06

@Kevin_Z  Hi  Kevin,

 

I had just unboxed the Tplink again and I have set it up.

 

However I can't get a log. System log tab seems to only get the boot events but no other events / errors are logged.

 

Please, any suggestion?

 

This is the boot sequence (IPs edited)

 

##########################################################################
#                    Archer C80  System Log 
# Time = 2020-08-26 15:27:59 209s
# H-Ver = Archer C80 1.0 : S-Ver = 1.4.6 Build 200628 Rel.56565n(4555)
# L = 192.168.0.1 : M = 255.255.255.0
# WAN = PPPoE : W = xxxxx : M = 255.255.255.255 : G = zzzzzzzz
# Cnt = 10624, Free = 10465, Busy = 159
##########################################################################

0days, 00:00:01, [lan]LAN: Attach mirror0 to stack.
  0days, 00:00:01, [bridge]bridge resource is already init.
  0days, 00:00:02, [lan]LAN: Set interface mirror0 ip=192.168.0.1 netmask 255.255.255.0.
  0days, 00:00:19, [wan]Attach interface eth0.
  0days, 00:00:19, [httpd]Http server start!
  0days, 00:00:23, [wan]Wan ethernet port plug on.
  0days, 00:00:24, [pppoe]try special dial type 0
  0days, 00:00:24, [pppoe]TX PADI
  0days, 00:00:24, [pppoe]RX PADO, AC-NAME=RSRGRA02, AC-MAC=xxxx
  0days, 00:00:24, [pppoe]TX PADR
  0days, 00:00:24, [pppoe]RX PADS[session=0001]
  0days, 00:00:25, [ppp][LCP]TX CONFIGURE_REQUEST
  0days, 00:00:25, [ppp][LCP]RX CONFIGURE_ACK[mru=1480, magic=00002A22]
  0days, 00:00:26, [ppp][LCP]RX CONFIGURE_REQUEST
  0days, 00:00:26, [ppp][LCP]TX CONFIGURE_ACK[mru=1492, auth=C223/5, magic=23A27E83]
  0days, 00:00:26, [ppp][CHAP]RX CHAP_CHALLENGE
  0days, 00:00:26, [ppp][CHAP]TX CHAP_RESPONSE
  0days, 00:00:26, [ppp][CHAP]RX CHAP_AUTHENTICATION_ACK
  0days, 00:00:26, [ppp][IPCP]RX CONFIGURE_REQUEST
  0days, 00:00:26, [ppp][IPCP]TX CONFIGURE_REQUEST
  0days, 00:00:26, [ppp][IPCP]TX CONFIGURE_ACK[ip=xxxx]
  0days, 00:00:26, [ppp][IPCP]RX CONFIGURE_NAK
  0days, 00:00:26, [ppp][IPCP]TX CONFIGURE_REQUEST
  0days, 00:00:26, [ppp][IPCP]RX CONFIGURE_ACK[ip=xxx, dns=xxxxxxx]
  0days, 00:00:27, [pppoe]ppp0 set localIp xxxxx remoteIp yyyyyyy mtu 1480
  0days, 00:00:27, [wan]advanced ddns -wanChanged
  0days, 00:00:27, [wan]systool sntpc -sntpRequest
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2652

Replies: 5

Related Articles
Archer C80 IPTV issue
503 0
Archer C80 AC1900 post firmware update issue
3189 0
IGMP Snooping and IGMP Proxy
7867 0
Archer C80 AC1900 Supports SMB1 or not
320 0
AC1900 - Archer C80
949 0
Archer C6 IPTV issue
4924 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.