WIFI CHANNEL(OVERLAPPING VS NON OVERLAPPING
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WIFI CHANNEL(OVERLAPPING VS NON OVERLAPPING
In the 2.4 GHz band, 1, 6, and 11 are the only non-overlapping channels.So question is.Lets said living in condominium,all theneighbours using 1,6,11 channel .IS is better to use a crowded 2.4ghz wifi channel 1,6,11 or unused 2,5,9
Re:WIFI CHANNEL(OVERLAPPING VS NON OVERLAPPING
Hi,
in general i say connect to the non overlapping channels (even if there are other accesspoints). The devices also the other accesspoints hear each other and react on the same channel to produce the maximum throughput.
Chosse the non overlapping channel with the most far away devices. You see it at the signal strength of the devices.
But you can test to find the "best" channel and choose what ever you want. But you will disturb the others and the "loudest" wins 
.
Best Regards.
Archer AX73(EU)V1 in Router Mode to use OneMesh with RE300 (used as AP only)