Archer AX10 v1 vs v1.20
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
What is changed in v1.20. Is it better then v1?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, actually, the basic functions and features are the same on both AX10 V1 and V1.20, we generally update the package and product label to mark the package or production revision, the number after the period is usually due to a change in the display box or where the device came from.
- Copy Link
- Report Inappropriate Content
Hello, actually, the basic functions and features are the same on both AX10 V1 and V1.20, we generally update the package and product label to mark the package or production revision, the number after the period is usually due to a change in the display box or where the device came from.
- Copy Link
- Report Inappropriate Content
According to the product datasheets, AX10 revision v1.20 appears to bring some improvements to 2.4 Ghz reception sensitivity, indicated by the following (lower dBm is better):
11g 6Mbps:-91dBm to -94dBm
11a 54Mbps:-74dBm to -77.5dBm
11n HT20_MCS0:-90dBm to -93dBm
11n HT20_MCS7:-73dBm to -76dBm
11n HT40_MCS0:-88dBm to -91dBm
11n HT40_MCS7:-70dBm to -73dBm
No idea how much of a difference it makes in day-to-day use.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Even though the basic features and functions are the same on both Archer AX10 v1.0 and v1.20, the firmware could still be independent, you cannot install the firmware for v1.0 on v1.20 hardware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4326
Replies: 4
Voters 0
No one has voted for it yet.