RE300/305 supported 5GHz channels?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm using Ubiquiti WIFI access point "UAP-AC-LR" to connect to my devices.
Currently I have 4 close-proximity neighbors in my apartment, all using 5GHz WIFI networks.
The WIFI interference is the strongest at the entrance of my apartment, where my "Google Nest Hello" WIFI doorbell camera is.
Previously I've manually set to channel 132 (DFS), the camera did not disconnect from the main access point even though the signal was weak (<-70dB) because there was minimal/no interference.
Now because I'm connecting to RE300 and RE305, it seems that I'm limited to channel 36/40/44/48 only.
The problem is that the doorbell camera keeps dropping connection every few hours, sometimes in minutes (presumably my neighbors are actively using their WIFI networks).
Below is my screenshot of the scanned WIFI usage activity from living room (better case scenario), the actual activity at main entrance gets worse than in the screenshot.
My question is,
- Is there any supported channels other than 36/40/44/48 ?
- If not, will there be a firmware upgrade to support more channels?
