What region is my wifi router from? I want to update my firmware for mesh setup
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, this Archer C7 V2 is quite old version, you may try to update its firmware from the local website:
https://www.tp-link.com/support/download/archer-c7/v2/#Firmware
- Copy Link
- Report Inappropriate Content
Hi, as I mentioned earlier, this C7 V2 is quite old, it doesn't support Onemesh feature, you cannot install the firmware for V4 or V5 into your V2 router, they are different pieces of hardware and it is not allowed to install the firmware across the hardware.
Meanwhile, Deco mesh is not compatible with the Onemesh feature on the Wi-Fi routers, which means even you get a C7 V5 with Onemesh, they cannot build up a mesh network. For more details, please refer to this FAQ: https://www.tp-link.com/support/faq/2690/
Good day.
- Copy Link
- Report Inappropriate Content
Hello, this Archer C7 V2 is quite old version, you may try to update its firmware from the local website:
https://www.tp-link.com/support/download/archer-c7/v2/#Firmware
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello, if that is the case, it is suggested to refer to the below firmware recovery instructions to flash the correct firmware:
https://community.tp-link.com/en/home/stories/detail/582
I hope this helps.
- Copy Link
- Report Inappropriate Content
@Kevin_Z this worked but the firmware does not have any mesh update.
Is there any possibility of having this done on my router?
I have purchased a 3 unit deco system. I need to set that up using my C7 the main mesh router.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I was able to install version 2 but not able to install 4 & 5.
Any work around? Like I mentioned earlier I need V5 for the mesh setup.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, as I mentioned earlier, this C7 V2 is quite old, it doesn't support Onemesh feature, you cannot install the firmware for V4 or V5 into your V2 router, they are different pieces of hardware and it is not allowed to install the firmware across the hardware.
Meanwhile, Deco mesh is not compatible with the Onemesh feature on the Wi-Fi routers, which means even you get a C7 V5 with Onemesh, they cannot build up a mesh network. For more details, please refer to this FAQ: https://www.tp-link.com/support/faq/2690/
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1150
Replies: 8
Voters 0
No one has voted for it yet.