Can't change LAN IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't change LAN IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't change LAN IP address
Can't change LAN IP address
2020-11-11 14:37:41 - last edited 2020-11-13 10:03:17
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.3.6 Build 20200902 rel.65591(4555)

Hi,

I can't change LAN IP Address in Advanced menu Network LAN !

 

Message "WAN IP ADDRESS AND LAN IP ADDRESS CANNOT BE IN THE SAME SUBNET"

 

please help

 

thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:Can't change LAN IP address-Solution
2020-11-12 02:35:47 - last edited 2020-11-13 10:03:17

Connect your root router with cable to the internet port of C6 router, then connect via Wi-Fi to the C6 router and change its operational mode to Access point as woozle has suggested - see this manual. C6 router will reboot. Connect again via Wi-Fi to C6 router and disable the DHCP server if it's not, change its LAN IP address to 192.168.1.254 (for example) - same network as the root router. This may reboot the C6 router again. Upon reboot you should be fine accessing it via Wi-Fi or cable and it will extend your wireless network.

 

If that scenario doesn't suit you then you can try extending your root router Wi-Fi coverage by enabling WDS bridging on 2.4GHz network. In that scenario you don't have to connect your routers by cables. Connect to C6 via Wi-Fi and go to System tools -> System parameters. Enable WDS Bridging for 2.4GHz network. Disable the DHCP server if it's not, change its LAN IP address to 192.168.1.254 (for example) - see this manual as a reference.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#6
Options
6 Reply
Re:Can't change LAN IP address
2020-11-11 18:47:17

@Mala116 

 

Do you mean you can't change the LAN IP address to a very specific one or you can't change it to any other IP address at all?

 

Anyway, the WAN IP address and the LAN IP address cannot be in the same subnet. That's just the way it is. 

 

If you want the LAN IP address of your C6 to be in the subnet that is currently used by the network to which your WAN port is connected to, then you would first have to change that subnet to something else. 

  0  
  0  
#2
Options
Re:Can't change LAN IP address
2020-11-11 19:32:00 - last edited 2020-11-11 19:37:47

@Mala116 

The purpose is to extend the wifi of my root router

 

My ISP router address is 192.168.1.1 and SSID is SFR_E19F

MY C6 ROUTER IS 192.168.0.1 AND SSID is TP-LINK_859

 

Routers are RJ45 wire linked, my computer is wire linked to the root router.

 

  0  
  0  
#3
Options
Re:Can't change LAN IP address
2020-11-11 19:40:24

Also, the only way to access to the TP LINK is router is via TP-Link wifi

  0  
  0  
#4
Options
Re:Can't change LAN IP address
2020-11-11 22:11:10 - last edited 2020-11-11 22:14:02

@Mala116 

 

If you want both routers to be in the same subnet and don't need any of the special router functions of your C6, then you could switch the C6 to "Access Point" mode and check if that works better for you.

  0  
  0  
#5
Options
Re:Can't change LAN IP address-Solution
2020-11-12 02:35:47 - last edited 2020-11-13 10:03:17

Connect your root router with cable to the internet port of C6 router, then connect via Wi-Fi to the C6 router and change its operational mode to Access point as woozle has suggested - see this manual. C6 router will reboot. Connect again via Wi-Fi to C6 router and disable the DHCP server if it's not, change its LAN IP address to 192.168.1.254 (for example) - same network as the root router. This may reboot the C6 router again. Upon reboot you should be fine accessing it via Wi-Fi or cable and it will extend your wireless network.

 

If that scenario doesn't suit you then you can try extending your root router Wi-Fi coverage by enabling WDS bridging on 2.4GHz network. In that scenario you don't have to connect your routers by cables. Connect to C6 via Wi-Fi and go to System tools -> System parameters. Enable WDS Bridging for 2.4GHz network. Disable the DHCP server if it's not, change its LAN IP address to 192.168.1.254 (for example) - see this manual as a reference.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#6
Options
Re:Can't change LAN IP address
2021-12-31 05:52:03
hi i am trying to set my archer vr1600v as a second router i turn off DHCP and change the ip address to match the main router. hit save and it reboots, but i can't login via the new ip address. any idea of what may be the issue pls?
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 5549

Replies: 6

Related Articles