ONE MESH compatibility for TENDA

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ONE MESH compatibility for TENDA

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ONE MESH compatibility for TENDA
ONE MESH compatibility for TENDA
2020-11-23 11:37:02 - last edited 2021-05-14 09:47:45
Model: Archer AX10  
Hardware Version:
Firmware Version:

Hello,

 

1. When the Archer AX 10 will get the ONE MESH capability?

2. Does ONE MESH works with TENDA devices?

 

Eli

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ONE MESH compatibility for TENDA-Solution
2021-05-14 09:47:41 - last edited 2021-05-14 09:47:45

Hi @Eli_41,

 

The Onemesh firmware for the Archer AX10 is available, please check for the update on your router web GUI/Tether app, or you can download it from the TP-Link official website, then install it manually:
Archer AX10 V1: https://www.tp-link.com/support/download/archer-ax10/v1/#Firmware

Archer AX10 V1.20: https://www.tp-link.com/support/download/archer-ax10/v1.20/#Firmware
Note: The Onemesh firmware for V1.20 may not be available now, please check it later in one day or two.

 

If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:

https://www.tp-link.com/support/faq/2509/

 

Let the community know if there is an issue.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:ONE MESH compatibility for TENDA
2020-11-23 12:13:32

@Eli_41 

 

Hello, thanks for asking.

 

As for the Onemesh firmware, it is suggested to keep an eye on the TP-Link official website, as we currently cannot provide you an ETA:

https://www.tp-link.com/onemesh/product-list/

 

We may say sorry the Onemesh will not be compatible with the devices from other brands, as we know that the Wi-Fi Alliance does not require the same technology to construct Mesh networks, so the methods and technologies used by each network provider are different. Therefore, there is no way to combine different brand products to build a Mesh network. For more details, please refer to the below Q&As:

https://www.tp-link.com/support/faq/2690/

 

Have a nice day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:ONE MESH compatibility for TENDA-Solution
2021-05-14 09:47:41 - last edited 2021-05-14 09:47:45

Hi @Eli_41,

 

The Onemesh firmware for the Archer AX10 is available, please check for the update on your router web GUI/Tether app, or you can download it from the TP-Link official website, then install it manually:
Archer AX10 V1: https://www.tp-link.com/support/download/archer-ax10/v1/#Firmware

Archer AX10 V1.20: https://www.tp-link.com/support/download/archer-ax10/v1.20/#Firmware
Note: The Onemesh firmware for V1.20 may not be available now, please check it later in one day or two.

 

If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:

https://www.tp-link.com/support/faq/2509/

 

Let the community know if there is an issue.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 3298

Replies: 2

Related Articles