Archer MR200 not allowing VPN passthrough

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR200 not allowing VPN passthrough

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR200 not allowing VPN passthrough
Archer MR200 not allowing VPN passthrough
2020-12-01 12:07:57
Model: Archer MR200  
Hardware Version: V5
Firmware Version: 1.0.0 0.9.1 v0001.0 Build 200511 Rel.42539n

I cannot connect to my work VPN server from my laptop via my MR200. I am able to connect using the same SIM in my phone so it is not the mobile network. Do you have any suggestions?

  1      
  1      
#1
Options
2 Reply
Re:Archer MR200 not allowing VPN passthrough
2020-12-04 10:56:40 - last edited 2020-12-04 10:57:46

@GreatScot 

 

Hello, can you please confirm again, the MR200 should support VPN pass-through by default, you may find it on Advanced>NAT Forwarding>ALG:

 

BTW, what kind of VPN server are you trying to connect to? PPTP or L2TP? Ensure the pass-through is enabled. You may also check the firewall and DoS Protection setting on the MR200, ensure it is not blocking this VPN connection, try to disable them to confirm.

 

Meanwhile, what is the WAN IP address on the MR200? Is it public one or private one?

 

Is there an error message when you tried to connect to the VPN server on the computer? Please share with us the screenshot of the error, thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer MR200 not allowing VPN passthrough
2021-03-30 02:28:04

@Kevin_Z 

Good day Kevin!

 

I  have same question. All above options exist and enabled. But I can't use IPSEC option in VPN

 

How can I get that option on my router?

 

Thanks in advance!

  0  
  0  
#3
Options