Home Network Community > All Threads > RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914
< All Threads

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914
RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914
2020-12-14 09:26:16 - last edited 2020-12-17 08:33:42
Model: RE450  
Hardware Version: V2
Firmware Version: 1.0.4

I recently upgrade from 1.0.4 to 1.0.5 and the power schedule is not working anymore. By downgrading to 1.0.4, it was working again.

RE450 v2 used as Access Point. 

Time setting is OK with both firmware (GMT+1)

Daylight saving time enabled

Led OFF time from 00:00 to 23:59

Power OFF time from 22:00 to 06:30

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914-Solution
2020-12-17 08:33:23 - last edited 2020-12-17 08:33:42

@GSKO 

Good day!

Thank you very much for your feedback.

This issue was caused by the DST(Daylight Saving Time).

Currently, please disable the DST(Daylight Saving Time) to make the LED control function work.

 

We will solve this problem later with the new firmware.

Please kindly check our official website periodically later to get the latest firmware.

Thank you!

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914-Solution
2020-12-17 08:33:23 - last edited 2020-12-17 08:33:42

@GSKO 

Good day!

Thank you very much for your feedback.

This issue was caused by the DST(Daylight Saving Time).

Currently, please disable the DST(Daylight Saving Time) to make the LED control function work.

 

We will solve this problem later with the new firmware.

Please kindly check our official website periodically later to get the latest firmware.

Thank you!

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#2
Options
Re:RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914
2020-12-17 15:29:16
Thanks! I have Tested the workaround and it works.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 980

Replies: 2

Related Articles
RE450 V2 LED and power control doesn't work after firmware update to 1.0.5
3998 1
RE450 - 2.4 ghz extended Wifi doesn't work.
1180 0
RE450 Firmware update. Configuration web doesn't work
1850 1
RE450 5G Doesn't work
334 0
RE450 doesn't work on VPN via internet
892 0
RE450 cannot schedule weekly/monthly restart
531 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.